Click on the image to view the original image
Electro Hydraulic Operation Bed medical equipment Compatible Electrical C Arm Table
Are you searching for medical euipment manufacturer at present?
Are you in the trouble of product quality and bad after-sale service?
Do you expect for a manufacturer working for this feild more than 20 years?
| TECHNICAL PARAMETERS | |
| 1.Full Carbon fibre head rest | ||
| 2.Clamp slot for full carbon fibre head rest | ||
| 3.Full carbon fibre table top without metal | ||
| 4.Table x-ray attenuation coefficient≤0.44mmAL; ( EHOT-M1; ≤0.76mmAL ) | ||
| 5. With one key one key reset function and "V" and revised "V" | ||
| 6. Battery optional, once full of charge, can be usde for 80 times operation | ||
| 7. The base, scientific desgin of base provides a large room for the move of the C-arm, and a comfortable feet spare for the doctors and nurse, also ensure the operating table moves smoothly and stably during the operation. | ||
| Faceplate size(Carbon fiber material) | ( 2400*530 )±10mm | |
| Ground height( from the ground to the top of table, exclude mat) | Minimum height:(700±20)mm | |
| Maximum height:(1000±20)mm | ||
| Lift | (300±20)mm electric | |
| Longitudinal moving distance of bed surface | ( 280±20)mm electric | |
| Head and leg | Head section angle: 25°±2°( electric) | |
| Leg section angle: 25°±2°(electric) | ||
| Lateral tilt: | left: 21°±2°(electric) | |
| right: 21°±2°(electric) | ||
| Back section | up: 65°±2°(electric) | |
| down: 20°±2°(electric) | ||
| Leg section | up:35°±5°(manual) | |
| down:90°±5°(manual) | ||
| Head section | up: 45°±5°(manual) | |
| down: 90°±5°(manual) | ||
| X-ray absorption coefficient( X ray attenuation coefficient of bed plate, optional accessory) | ≤0.44mmAL | |
| Table body locking | electric | |
| Power | AC: 220V 50Hz 300VA; | |
| DC:24V(Panasonic acid battery) | ||
Our main products lines are: operation table, operation lamp, ceiling pendant, hospital bed, medical trolley, patient monitor, x-ray film viewer, medical cabinets, Digital x-ray machine, and other hospital furniture and veterinary equipment. Approved by CE/FDA/FSC/ISO9001/IS013485 certs and so on.Our factory is located at Yanzhou economic development zone, Jining city, Shandong province. There are 100,000m2 workshops, 400 employee, more than 20 engineers, and a professional after-sales service team. From 1998, we produced the hospital furnitures, such as hospital bed, medical stretcher, medical trolley and other cabinets. From 2003, we develop the operation table, operation lamp, ceiling pendant. From 2010, we develop the imaging operation table, X-ray machine, patient monitor and so on. From 2015 year, we start to produce the veterinary equipments, such as vet operation table, exam table, cages etc. Every year we have new product research and development. We have Purification workshop of operation lamp, Robot welding, Rinsing and Phosphating workshop, Epoxy powder coating workshop, ABS spare parts production, Fully automated workshop. The showroom in factory display the full set of product lines, and we also have a showroom in Shanghai, our main markets are 10% North American, 10% South American, 15% Middle East, 15% Southeast Asia, 10% Europe, 10% the Commonwealth of the Independent States, 10% Oceanic and others 5%.
More about us, pls go to our homepage.
1.If you are building a new hospital, we can offer your solutions of OR and ICU room;
2.Our sales team give you the quotation and answer your any questions and doubts about products;
3.You are welcome to visit our factory at any time;
4.we will offer you the solutions of quality problems within 24hours;
5.our after-sales service:
Warranty: 1-2years due to different products, and lifetime maintaining.
A. Engineer goes to your hospital and Provide on site customer training and guide,
B.We send the free parts to you by courier and give you technical guidance via online video,
C.We support you free training of products.
Q: Are you manufacturer ?
A: Yes,we have our own R&D team and sales team,We provide you one-stop service.
Q: Do you have CE,ISO13485?
A: Yes,our products are approved by CE,ISO13485
Q: Is OEM &ODM available in your factory ?
A: Yes, you just offer us necessary documents and then we will produce the products as your requirements.
Q: What is your Payment term?
A: 1.L/C at sight;
2.T/T:30% deposit by T/T,70%balance by T/T before shipment
3.Trade term:EXW, FOBShanghai or CIF&CFR
Q: What is your Packing details?
A: 1.Wooden case or carton package,standard export packages
2.All of the productions are inspected carfully by QC before delivery.
Q: What is your Delivery time?
A: Usually, we make merchandise inventory, if we have the products in stock,The delivery time is5-10 days after receiving the deposit;
If we don’t have the products in stock, we will arrange the production right now, the delivery time will be 20-30days,It depends on the quantity of order
Q: What is your Min.order?
A: There"s no minimum quantity
If you are looking for animal/veterinary equipments , pls visit this website: mtmedical.en.alibaba.com