Click on the image to view the original image
Best Quality Dali Driver 60W LED Strip Light Driver LED Dimmable Driver
Technical Perameters:
Output | Rated Power | 60W |
Output Voltage | 24Vdc | |
Rated Output Current | 2.5A | |
Ripple and Noise | 500mVp-p | |
Voltage accuracy | ± 3% I0 | |
Efficiency | ≥89% @ 100 Vac, ≥90% @ 277Vac | |
Line Regulation | 5%Io | |
Load Regulation | 5%Io | |
Turn On Delay Time | Under normal conditions, the maximum delay time is1 second
| |
Input | Input Voltage | 100-277Vac |
Input Frequency | 50/60Hz | |
Input Current (Typ.) | 0.7 A @100Vac , 100% load | |
No load Voltage | 2Wmax | |
Inrush Current | 60Amax. @ 230Vac, 25℃ | |
Power factor(Typ.) | PF>0.95@ 100-277 Vac, 100% load | |
THD | THD<20% @ 100-277 Vac, 100% load | |
Protection | Open circuit | When the LED disconnection the product is protected such as hiccup or when it is at the highest point of output voltage, the power supply shall be self-recovery when the fault condition is removed |
Short Circuit | The input power shall decrease when the output rail short, the power supply shall be self-recovery when the fault condition is removed | |
Safety compliance | Safety Standard | GB19510.1,GB19510.14;EN61277-1,EN61277-2-13;UL8750, CSA C22.2No.250.13-12 |
EMI | GB17743,GB17625.1;EN55015,EN61000-3-2, EN61000-3-3, FCC Class B. | |
Surge Immunity | CM-2KV; DM-1KV Performance Criterion:B | |
Leakage Current | The leakage current shall be less than 0.25mA for Class 2 at maximum input voltage | |
Features: · Constant Voltage mode output · Metal housing with Class Ι design · Built-in active PFC function · IP20 design for indoor installations · 3 in 1 dimming · Typical lifetime>5000 hours · 5 years warranty
| ||
Product photo :
Applications:
*LED Strip Lights
*LED Linear lighting system
*LED Troffer.
*Slim Panel light
Related products:
| 100-277Vac: |
Shenzhen Fahold Electronics Co., Ltd dedicated to design andmanufacture led driver since 2009,we provide constant current and constant voltage led drivers with multiple dimming functions also accept customize service.
Fahold is located in Shenzhen, China.Having factory more than 5000 square meters and auto-production equipment & facilities to control products' quality through out all stages and meet customer's different demand, in addition, holding 150 professional employees to provide engineering suggestion for you.
Our factory were ISO9001 Certified, Products has been passed UL, CE, SAA Certified,all of these are showing our knowledgeable and reliable productionteam, and perfect QC inspect system.
Related Products:
|
|
|