Click on the image to view the original image
Product Description
EMA series emergency drive is UL listed led emergency driver for Field and factory installation that allows
the same led fixture to be used for both normal and emergency operation.In the event of a power failuere.
The emergency driver switches to emergency mode and operates the existing fixture to 90 minutes.
The unit contains a battery.charge,and converter for individual fixture requirements.This module will
opeatean LED array load at 8w,15w,20w,30w with constant power at a rated output voltage of 25-230V.
The patented constant power design of the module maintians the output wattage to LED array even as the
system voltage diminished resaulting in a constant illumination level for entire emergency runtime.
The integrated self-diagnostic circuitry will automatically conduct 3 monthly 30- minutes and annual
90-minute tests to verify proper emergency capability per Life Safety Code requirements.
Ordering Information:
|
Place of Origin |
China |
|
Bulb Type |
LED |
|
Battery Type |
Lithium battery 0° to 55° C |
|
Material |
Galvanized steel case |
|
Usage |
LED lighting |
|
Certification |
UL Listed, CEC Title 20, BC, FCC, RoHs, UL, cUL, Class 2, Class P, BC, CEC Title 20 |
|
Specifications |
30W 20W 15W 8W |
|
Warranty(Year) |
5-Year |
|
Product Series |
LED Emergency Driver |
|
Warranty |
5 Years |
|
Type |
Constant power |
|
Emergency Backup Mode |
At least 90 Minutes |
|
Feature |
Compatible with any AC Driver |
1.Optimized for higher voltage LED luminaires with 25-230VDC driver output.
2.High Effciency Performance meets CEC effciency standards (CEC-400-2014-009-CMF).
3.Increased illumination output designed for elevated fxtures
4.UL Listed for factory and feld installation
5.Self-sensing output voltage operates various
6.product types reducing product SKUs for emergency options.
Safety Regulation:
| Certificate | Approval Marks | Standard | Valid | Remarks |
| UL | |
UL | YES | North America |
| cUL | CAN/CSA-C22.2 NO. 141 | YES | Canada | |
| BC | |
CEC Title 20 | YES | California |
| FCC | |
FCC | YES | North America |
DIMENSION:
Case- 12.36'' X2.28''X1.5 ''(314mmX58mm X38mm)
Mounting Center-11.8''(300mm)
Flexible Conduit 13''(330mm)
| Case length | 314mm |
| Case Height | 38mm |
| Case Width | 58mm |
| Mounting lenght | 330mm |
WIRING DIAGRAM:
Caution:
Verify that all replacement lamp types marked on the installed luminaire are also identified as
suitable for use with this emergency battery pack.
The emergency LED driver shall be enclosed by the LED luminaire and bonded to the grounding
of LED luminaire (via green grounding wire attached to driver).
Do not use outdoors.
Do not let power supply cords touch hot surfaces.
Do not mount near gas or electric heaters.
Use caution when servicing batteries. Battery acid can cause burns to skin and eyes. If acid is
spilled on skin or in eyes, flush acid with fresh water and contact a physician immediately.
Equipment should be mounted in locations and at heights where it will not readily be subjected to
tampering by unauthorized personnel.
The use of accessory equipment not recommended by the manufacturer may cause an unsafe condition.
Do not use this equipment for other than intended use.
SELF-Diagnostic:
The integrated self-diagnostic circuitry will automatically conduct monthly 30-second and
annual 90-minute tests to verify proper emergency capability per Life Safety Code requirements.
Press the test button to cut the power to the AC driver and switch the system to emergency mode.
Release the test button to return to normal mode. Switch off the circuit breaker to simulate a full
power outage.
NFPA 101, Life Safety Code outlines the following schedule:
Monthly - Insure that the test button light is illuminated. Conduct a 30 second discharge test by
depressing the test button. The LED load should operate at reduced output.
Annually - Insure that the test button is illuminated. Conduct a full 90 minute discharge test.
The unit should operate as intended for the duration of the test.
“Written records of the testing shall be kept by the owner for inspection by the authority having jurisdiction.”
Company Profile
Packing & Shipping
FAQ
