Click on the image to view the original image
170VDC AC Solution emergency led driver 8w 18w for 0-300W LED fixture
EMAH series emergency drive is UL listed led emergency driver for Field and factory installation .Emergency Battery Backup provides peace of mind in times of power loss, delivering up to 8 or 18w for 90 minutes with no light degradation. AC-LEDEM series function for 0-10v dimmable products or non-dimmable fixtures,The unit contains a battery, charger,and converter circuit in a narrow profifile enclosure for installation within the channel space or wire way. AC-LEDEM slim backlit series a rated output voltage of 170VDC.
- Highvoltage output 170Vdc equal 120Vac,Works with 0-10V dimmable or non-dimmable,internal or external driver fixturs.
- High Effciency Performance meets CEC ,effciency standards (CEC-400-2014-009-CMF).
- Increased illumination output designed for elevated fxtures
- UL Listed for factory and feld installation
- Self-sensing output voltage operates various
- Output power selectable for reducing product SKUs ,reduce stock cost.
| Model No. | EMAH08ACT-170 | EMAH18ACT-170 |
| Output Voltage | DC 170VDC | DC 170VDC |
| Output Power | 8W | 8W |
| Input current | 150mA(MAX) | 150mA(MAX) |
| Input power | 7W(Max) | 7W(Max) |
| Input voltage | 100-347VAC | 100-347VAC |
| Emergency operation | ≥ 90 minutes | ≥ 90 minutes |
| Operating Temp | 5°to 50°C | 5°to 50°C |
| Battery | Lithium | Lithium |
| Recharge | 24 hours | 24 hours |
EMAH series 8w and 18w size:
Case : 13.5 8' X1.57 ''X0.82 7 '(345mm X40mm X28mm)
Mounting Center: 12.24''(311mm)
Flexible Conduit 13.78''(350mm)
EMAH series Wiring Diagram :
Catuion :The LEDfixture must integrated with 0-10V driver ,when the LED fixture power more than emergency led driver power .
Emergency driver indicator function details :
| Test button Indicator Operation details | |||||
| Model | Test switch operation | Indicator status | Comment& solutions | ||
| AC ON | No pressed | ON (NO flashing) | EM is charging | ||
| AC ON | Pressed on test switch | 2 seconds on and 2 seconds off | EM is discharing,after 30seconds back to AC mode | ||
| AC ON | Pressed twice (2S) in seconds | 2 seconds on and 2 seconds off | EM is operate long time discharing until battery be full discharged,then back to AC charging mode | ||
| AC OFF | 2 seconds on and 2 seconds off | Switches to emergency mode and operates the existing LED fixture to 90 minutes until full discharge | |||
| AC OFF | When EM driver is discharging ,press test switch ,EM will stop discharge,Need AC on activate whole LED fixture. | ||||
| Failure | When indicator flash faster,or going off,the EM back up maybe have compatibilble problem | ||||
CAUTION:
- During AC operation, remember no touch or remove any wires in case of electric shock.
- During emergency operation, before touching and disconnecting the wires,remember to press the test button again to make the led lamp and indicator light off to avoid electric shock .
- For the emergency led driver 8w work with LED lamp not more than 8w no need dimmable function, and more than 15w need the dimmable function .The same as 18w .
- The voltage input to the dimmable wires(DIM+,DIM-) of emergency LED driver must less than 20Vdc.
Carton package and pallets package can be choosed .
