Click on the image to view the original image
JIYI K3A flowmeter calibration method (IFLY):
Connect the flow meter to the LFS, and then set the flow meter to detect drug failure in the assistant 2 software. Then empty the gas in the pipe, then go to the mobile phone APP "IFLY" interface, fill in the water capacity, then take off, and then click on the calibration, then the water pump will automatically turn on to the maximum, after spraying, the flow meter will not rotate and detect the medicine interruption signal. The writing was successful.
JIYI K++ flow meter calibration method (flying guard housekeeper):
Connect the flow meter to K1 or K2, and then set the drug-off detection to "velocity detection" in the assistant K++. Then empty the gas in the pipe, go to the "Flying Guardian" APP interface, find the flow calibration page, fill in the added dose value (for example, 5L), do not need to take off, click start on the ground, the water pump will automatically turn on to the specified Opening degree, click to stop when the water spray is finished, after writing successfully.
Product Description
Specification
|
Scope of application:
|
Suitable for water heaters, credit card machines, automatic water vending machines, etc.
|
|
|
Model
|
S302
|
|
|
Output signal
|
NPN pulse signal
|
|
|
Pulse frequency
|
f=23*Q+/-3%Q=L/MIN
|
|
|
Output pulse high level
|
>DC4.7V (input voltage DC 5V)
|
|
|
Insulation resistance
|
>100MΩ
|
|
|
Working voltage
|
DC5-24V
|
|
|
Water inlet size
|
inner diameter 7mm, outer diameter 13mm
|
|
|
Water outlet size
|
inner diameter 8mm, outer diameter 13mm
|
|
|
Thread length
|
10.3mm
|
|
|
Material
|
POM
|
|
|
Weight
|
37 grams
|
|
|
Working flow range
|
0.3-6/min
|
|
|
pressure
|
≤0.8MPa
|
|
|
Operating temperature range
|
≤80℃
|
|
|
Operating humidity range
|
35%-90% RH
|
|
|
Storage temperature
|
-25-+80℃
|
|
|
Storage humidity
|
25%-95%RH
|
|
|
Outgoing line (length 60CM)
red positive electrode, black negative electrode, white signal line
|
||