Click on the image to view the original image
25w light sensor led motion sensor light with 10 years experience
Functions:
Stand-by dim: After a pre-set time the lighting ahead switches to dim, and comes into stand-by status.
Identify the ambient brightness. An example: if the the standby time is set at 24h and sensor lux is set at night:
1. Daylight – the light is off all of the time
2. Evening – The light automatically comes on at the dimmed level selected, when the ambient light level drops to that fixed level.
3. Evening/Night – the light remains on all the time that the ambient lux is low at the dimmed level but goes up to the full brightness when someone walks by.
4. Morning –As the morning comes and the light level increases, the light switches off completely.
Sensor Setting
Detect range setting: 2-10m, radii.
Time setting: 10 sec-20mins
Light-control setting: 2-2000lux
Dimmable function:
Stand-by brightness: 0%, 5%, 10%, 20%, 30%, 40%, 50%, 60%
Stand-by lighting time: 24h, 30s, 1min, 5min, 10min, 30min, 1h, 2h
If switch to 0% brightness, the standby dim function is shut off If switch to 24h lighting time, the light is not off if the amibient lux is lower than setted sensor lux.
| Input Voltage: | 220V-240V/AC, 100-130V/AC |
| LED: | 140*SMD2835 LED |
| Power: | 25W |
| Luminous Flux: | 1600lm |
| Microwave Sensor: | Dimmable and Wireless Link |
| Material (diffuser/base): | PC/Aluminium dia-casting |
| IP Rating: | IP20 |
