Click on the image to view the original image
Product parameters
Brand | zhengs' Royal | Material | Double lacquer pure copper silicon steel hardware, ABS plastic acrylic |
Model | HJ3039 | Light source | LED36W |
Fuselage size | 40cm*108CM | Using area | 8~20 square meters |
Blade size | 36" 、42" | Usage scenarios | Bedroom, living room, dining room, hotel, office |
Control mode | Wall control remote control, wall remote control | Product process | Polishing, polishing, painting, electroplating |
Certification | 3C CE CB | Transport | Protocol to transport |
Order quantity | 100 | Template | Freight charge, sample order reduction free |
advantage and disadvantage
Control mode |
Wall control |
Remote control |
Advantages | Affordable and durable, can be in a | Speed regulation and turn on and off lights, |
Disadvantages | It takes 2 fires and 1 zero wiring to install | Durability, stability is not as good as wall control |
Pull rope, remote | 1. Remote control and wall control cannot be installed at the same time! | |
Special remind | 1.The ceiling fan light of this brand is only recommended to be remote-controlled by this brand. | |
installation basic requirements
Floor height is greater than or equal to 2.6?
Ceiling load is greater than or equal to 40KG
A standard installation
The diagram shows the standard configuration (hoisting installation), simpleConvenient way to install if you are a new house specializing in repair The installation location does not do decorative ceiling, this is the defaultInstallation method.
There is a ceiling installation
The graph is to have adornment smallpox condole carries the top should condole installs ahead of scheduleInstall on cement board, hanger rod and electric wire are exposed install Act the role of ceiling horizontal line, lengthen derrick as the case may be, longDegree depends on the height of the floor, can consult customer service. Note: the fan blade distance from the ceiling should be more than 25cm. Otherwise it will affect the wind force.
Decorative ceiling (wood)
The figure shows the ceiling with formwork and the installation positionIt must be reinforced to bear a weight of 40 kilograms for liftingPosition template thickness is not less than 30mm, decorationRemind the master to strengthen and thicken in this position.
Product Description
5 large combination
After-sale service
◪ Uy a machine to be able to enjoy freely in zheng shi royal
◪ Don't fix the broken one, just replace it with a new one!
◪ Ceiling fan lamp motor as long as there is no normal use of the function of damage, zheng royal directly for the new motor!
◪ The service is effective within one year after purchase! (the motor warranty guarantee for ten years is effective at the same time!)
Precautions for installation
To avoid fire and electric shock, please read the following items carefully:
1. Qualified personnel with experience in installation and wiring must refer to various standard procedures and instructions for operation.
2. When installing or wiring, the switch must be turned off, and no live operation is allowed.
3. Read the instructions and all kinds of use materials in detail before installing ceiling fans. If you are not sure, please contact the customer service in time.
4. Do not damage other concealed facilities of electric wires when drilling or drilling in the wall.
5. In the installation environment you choose, when the fan blade rotates, it shall not touch any obstacles, from the outer edge of the blade to the ground at least
Should leave the interval of 2.2 meters, arrive at metope at least 0.6 meters.
The ceiling that hangs condole fan or beam and the screw that fix condole fan, must be able to bear 60 kilograms 72 hours hind do not loosen do not fall off
Of pull force, ability assures condole fan to run when be at ease and reliable.
7. Do not bend the fan blade fork when installing the ceiling fan for shake correction or cleaning.
8. Do not install ceiling fans or switches in the bathroom or in places where showers can damp you. Unless purchase is to have waterproof condole fan.
9. Do not install any additional solid-state circuit or speed regulator or other devices in the ceiling fan system, except with the permission of the owner.