Click on the image to view the original image
| Product | 2ft/ 0.6m LED Tube | 4ft/ 1.2m LED Tube | 5ft/ 1.5m LED Tube |
| Model | 10w | 18w | 25W |
| Dimension | 594/ 602mm | 1212mm | 1513mm |
| Luminous (Frosted lens) | 900lm±10% | 1800lm±10% | 2100lm±10% |
| Luminous (Emgergency ) | 350lm±10% | 700lm±10% | 1000lm±10% |
| Emgergency Time | 1~3hours | 1~3hours | 1~3hours |
| Emergency output power | 3W | 6W | 9W |
| Emergency output current | 80mA | 160mA | 240mA |
| Emergency output Voltage | DC32~42V | DC32~42V | DC32~42V |
| Battery Size | 7.4V700mAh | 7.4V1500mAh | 11.1V1500mAh |
| Color Temperture | 3000K/ 4000K/ 5000K/ 5700K/ 6500K | ||
| CRI | 72~75, or Ra80, or Ra90 | ||
| Input Voltage | AC85~265V 50~60HZ | ||
| Power Factor | 0.90~0.95 | ||
| Efficiency | >0.86 | ||
| Beam Angle | >120 | ||
| Light-emitting surface | 180 | ||
| Warranty | 3years for LED Tube, 3 years for battery | ||
| Operation Temperature | -20ºC to 40ºC | ||
| Storage Temperature | -40ºC to 85ºC | ||
Description
25W Rechargeable Emergency Light LED T8 tube has two functions of general lighting and emergency lighting.
This is ideal for lighting failures or emergency situations when there is a loss of power. Supplied with a battery back-up pack and a slim shaped emergency module driver with li-ion battery these are easy to install.
Features
- LED Tube Light Source: SMD2835
- LED Material: AL + Strengthen PC cover
- Lifespan: >50,000hrs
- Up to 70% Energy Saving Consumption
- High Brightness
- Easy Installation
- Instant On
- High Shock/Vibration Resistance
- No Buzzing
- No Mercury/Poisons
- No Radio Frequency Interference
- No Flickering
1)Maintained Operation Module, no switch board equipped.
2)Maintained Operation Module, switch board equipped |
Sanforce is a manufacturer specializing in emergency conversion kits for LED and fluorescent lighting since 2008.
We cooperate with valuable supply chain, inspect all the incoming materials and set up strict product assurance system, such as SMT, Auto Aging test, Simulation test during our production process. We have very skillful and responsible workers, most of them have been working here over 6 years.
With strong technical support and customer- oriented service, you can be sure that Sanforce is ready to support you, whatever your needs.
1.What is your main product line is made?
We are dedicating to LED emergency power pack for commercial lighting, research,
manufacturing and sales, aiming to be a leading emergency lighting backup power producer.
Our main products include:1). Constant current output of Led conversion kit for LED panel
light, LED down lights and other LED light applications with external driver. Emergency
output power differed from 5-90% according to customer’s requirement.
2). 100% emergency output power of emergency kits for LED tube with AC220V or DC110-150V
output.
3). Emergency lighting battery packs for Fluorescent tube 14-98W.
4). High Temperature rechargeable NiCD and NiMH battery pack for emergency control gear
5). Emergency LED T8 tube and min LED T5 3W-4W
6) Constant power emergency kits.
2.Does battery have an end-of-charge detection/over voltage protection?
No, The battery is being charged all the time, The charging current will be decreased based
on the capacity status during the charging process. For NiCD and NiMH battery, it is
applicable for constantly charging without any risk even though no over voltage
protection. But under voltage protection is set up for discharging.
3.How long (months/years) before the battery discharge time goes below 2 hours?
Normally 2 years later.For Nicd battery, the capacity will be reduced by 10% at first of
year and 20%of the second year, it will remain 70%-80% after total 3 years.
4.If the battery reaches full charge, (NiCd in our case), and the fitting is supplied with
220VAC all the time, can you explain how does it not damage the battery when it keeps
charging all the time?
For Nicd battery we offered you, we set up the charging current at 0.05C(1/20 battery
capacity) that is suitable for long time constant charging, no any damage for battery. It’
s characteristics of NiCD itself.
5.What are your market reach throughout the region?
Our markets mainly spread over Europe, South of America, Africa and Asian Pacific region as
well as domestic marketing, we have 8 years of experience in foreign trade, we have worked
with buyers of lighting importers and distributors etc.
6.Your factory or trading company?
We are a factory, we provide OEM services and accept small order. We only focus on the
manufacturing of products-Emergency Conversion Kits.
7.You have the ability to do independent research and development?
Our engineering department has 3-5 people, we have the research and development
capabilities. We also collect each customer’s feedback regularly, We have the ability on
product improvement and new product development.