Click on the image to view the original image
Order Code | Lamps | Battery | Emergency Power |
FMO03 | 4-36W | 3-Cell 3.6V | 3-4W |
FMO04 | 8-58W | 4-Cell 4.8V | 4-6W |
FMO05 | 8-70W | 5-Cell 6.0V | 5-7.2W |
FMO06 | 14-70W | 6-Cell 7.2V | 6-8W |
FMO07 | 14-70W | 7-Cell 8.4V | 7-10W |
Desription
The“F” series is widely used for all of fluorescent lamps including T5/T8/PL/CFL/2D and so on. The emergency inverter provide high power and high voltage current to the lamp directly without assorting with ballast or starter in case of mains off, Emergency power can be set up 4W to 8W while emergency duration can be customized freely.
Properties
• 1or 3 h rated duration
• Compatible with all electronic ballasts
(dimmable and non-dimmable)
• Can also be used in combination with conventional magnetic ballasts
• Optimised AC output voltage for TC-DD and TC-L lamps
• Optimised DC output voltage for T8 lamps
• Cathode heating adapted for compact lamps
• Switchover relay with high-current contacts
• Green charge status display LED
• Test switch Emergency
Sanforce is a manufacturer specializing in emergency conversion kits for LED and fluorescent lighting since 2008.
We cooperate with valuable supply chain, inspect all the incoming materials and set up strict product assurance system, such as SMT, Auto Aging test, Simulation test during our production process. We have very skillful and responsible workers, most of them have been working here over 6 years.
With strong technical support and customer- oriented service, you can be sure that Sanforce is ready to support you, whatever your needs.
1.Can fluorescent emergency kit be used for LED light?
NO
The emergency output is high voltage and high frequency (1000v 230KZ))for fluorescent, That
is not applicable for LED system.
2.Can the light work as emergency function immediately once we installed the emergency conversion kit into standard lighting applications?
NO
The emergency output is high voltage and high frequency (1000v 230KZ))for fluorescent, That
is not applicable for LED system.
3.You have the ability to do independent research and development?
Our engineering department has 3-5 people, we have the research and development
capabilities. We also collect each customer’s feedback regularly, We have the ability on
product improvement and new product development.
4.Why is the fluorescent tube blackened once activate with emergency kit?
The reason is that our emergency output is one way of high frequency pulse,the output of
pulse waveform is not completed but only half of that .But itwill not affect the
functionality of fluorescent tube because of the emergencyrunning is not frequent. Unless
emergency back up functionality is neededall the time that will impact the life of tube
slightly.