Shenzhen Scott Electronics and Technology Co., Ltd.

T-300K LED pixel SD card controller, 8ports,each ports max support 1024pixels (8192pixels), light dimmer

"AC90-260V input,
8ports,each ports max support 1024pixels,with 1GB SD Card,can program DIY,can connect several TM200K together with RJ45 interfance to control more than 8192 pixels"

● T-300k System features:
A.32—256 grade Gray level，Support software Gamma correction。
B.Support the rules and special-shaped handle.
C.8 ports output，one port can support 512-1024 lamp pixels.
D.On-line (also can SD Card) control, offline control Can be multiple controllers used in combination, the contents of the line control program stored in the SD card.
E.Compatible with single line or double line chips.
F.If the controller to the lamps distance can choose photoelectric isolated transmission and as far as several distances of up to 200-300 M
Note: the T-300 K controller offline control, each machine controller must put a SD card.
2012 Edition T-300K controller can only be combined with the new version software LedEdit2012 . Using the old software does not support the new version of the controller, the new version of the controller has been printed the Chinese sign.
●.Support chips：

●  wiring diagram:T-300K LED pixel SD card controller, 8ports,each ports max support 1024pixels (8192pixels), light dimmer

NOTE：if chip is 256 grade gray level and Single-line IC choose .When programming choice high speed mode and one interface controls 1024 lamps the play speed can reach 30 frames/s. Double-line IC or single-line IC with low speed , one interface controls 512 lamps the play speed can reach 30 frames/s.

● The meaning of flag:

NOTE：According to TTL signal output， Ground of the controller must be connected to the lamp ground.

● Application scope:T-300K LED pixel SD card controller, 8ports,each ports max support 1024pixels (8192pixels), light dimmer
LED digital tube,、LED point light source、the exterior light and a module、 pixel screen (dazzle colour screens)、 high power DMX lighting.

● Specific parameters：
Memory card：
Type：SD card（if controlling so many lamps it is best to use the high-speed SD card.）
Capacity：128MB—2GB
Format：FAT
Store file：*.led
Physical parameters：
Working temperature ：-30℃—85℃
Weight：1.35KG
Working voltage：AC220V
Working power：8W
Size：L270mm×W180mm×H55mm
Signal port：3pin connect port
NOTE: T-300K Support online download the effect-file to SD card.
Before copy files to SD card ，The SD card must be formatted as FAT format.

● Trouble shooting:T-300K LED pixel SD card controller, 8ports,each ports max support 1024pixels (8192pixels), light dimmer
Question 1: controller after electrify, indicator light is normal, but the lamps no effect change

Answer: the reasons for this are the following:
(1) Please check lamps signal and controller have correct connection.

(2) If it is meet TTL signal, lamps and lanterns and controller must altogether, namely the lamps GND (ground) to the GND and controller (ground) got together.

(3) Please check the effect file of SD card ，the selected models whether current lamps and used the chip consistent.

Question 2: After power, the T-300k ERROR indicator has been flashing without display output

answer：The ERROR indicator has been flashing means the controller did not read the card correctly, possible problems:

①SD card is empty, with no effect file.

②The effect file in the SD card and the controller model are not match, please choose correct controller model in LedEdit and then re-create the effect file *led.

③SD card did not format to FAT before copy effect files.

④Please check the supply power voltage, the controller can be individually powered to exclude power reasons

⑤Changing the SD card and then test to exclude the possibility of a bad SD card

Q1. Can I have a sample order for led light?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q2. What about the lead time?
A:Sample needs 3-5 days, mass production time needs 1-2 weeks

Q3. Do you have any MOQ limit for led light order?
A: Low MOQ, 1pc for sample checking is available

Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.

Q5. How to proceed an order for led light?
A: Firstly let us know your requirements or application.
    Secondly We quote according to your requirements or our suggestions.
    Thirdly customer confirms the samples and places deposit for formal order.
    Fourthly We arrange the production.

Q6. Is it OK to print my logo on led light product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.

Q7: Do you offer guarantee for the products?
A: Yes, we offer 2 years warranty to our products.

1. Each product has been tested multiple times over a 24 hour periods, to ensure quality.
    All our products come with at least 2 years warranty.

2. All our products are made with super bright Epister LEDs.

3. For volume orders, we offer great discounts ,

4. We have a wide variety of products including LED strings, LED strips, LED modules, LED point light source. We offer          OEM and ODM services.

5. Customer service is a PRIORITY, We offer a wide variety of secure payment options, such as Alibaba Assurance order,     PayPal and TT with HSBC Trust.

SCOTT LED LTD has nearly 10 years commitment to delivering cutting-edge LED technology, high quality LED lighting and associated products meeting the highest possible technical standards and ensuring safety, reliability and value. Almost 10 years experience int he LEDlighting sector. 
Our products include LED strips, tubes, grow lights, quality fixtures, RGB controllers and power supplies; we are also able to meet global customers' OEM needs. With end-to-end Project Management from concept to finished products, we monitor and control every step of the process for global companies. We love challenges, we love what we do, and strongly encourage you to discover why.  
Export all over the world, within the shortest possible time.

Scott, LED - Light Years Ahead 

Q1. Can I have a sample order for led light?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q2. What about the lead time?
A:Sample needs 3-5 days, mass production time needs 1-2 weeks

Q3. Do you have any MOQ limit for led light order?
A: Low MOQ, 1pc for sample checking is available

Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.

Q5. How to proceed an order for led light?
A: Firstly let us know your requirements or application.
    Secondly We quote according to your requirements or our suggestions.
    Thirdly customer confirms the samples and places deposit for formal order.
    Fourthly We arrange the production.

Q6. Is it OK to print my logo on led light product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.

Q7: Do you offer guarantee for the products?
A: Yes, we offer 2 years warranty to our products.