Click on the image to view the original image
dc 5-24v 12 channel diy-usb matrix rgb led controller programmable
rgb led controller programmable
1. input dc 5-24v,matrix 12 channel
2. diy-usb, full color
3. addressable
Technical Parameters:
| working temperature: | -20+60°C /50~60Hz |
| Input Voltage: | DC~24V |
| Output signal: | 12CH PWM |
| Output current: | <5A/1CH |
| maximum number of documents pattern: | 16 |
| Output power: | 5V < 300W;12V<720W; 24V<1440W |
| Static power consumption: | <1W |
| connection mode: | common anode |
| Size: | L165 * W85 * H26 mm |
| packing size: | L176 * W96 * H50 mm |
| whole case size: | L496 * W272 * H308mm |
| net weight: | 290g |
| gross weight: | 355g |
| Warranty: | 2 years |
Summarization:
1, a single monochrome leds can control 12 road runners, 7 colour number 4,
2, DC5~24V wide working voltage, can control the leakage light, modules, light bar.
3, 12 road output, each output current up to 5 a, support monochromatic visible light, modules are 3000
4, more than one can cascade synchronous controller, can control up to 120, the effect can be modified, the USB download, simple and convenient operation, strong randomness
Connection mode
When more than one controller synchronous cascade demanded the controller address code as follows upon to determine the order
Example 1: < instance 1. Exe > create a light all the way from the first to last 12 road flash 3 times (jump) every picture delay time can define your own
Example 2: < instance 2. Exe > make a effect from 1 to 12 road light and from middle to both sides, from middle to both sides again bright (jump)
Example 3: < instance 3. Exe > create a gradient light all the way from the first to the no.12 (gradient)
Example 4: < instance 4. Exe > create a wavy gradient from running (gradient)
Example 5: < instance 5. Exe > create a 36 monochromatic light all the way from the first to the 36th road, road, and then destroy all the way from the first to 36 (gradient) pay attention to how to increase controller
Example 6: < instance 6. Exe > create a colorful bright all the way from the first to the fourth way, every road is not the same color
Example 7: < instance 7. Exe > create a colorful bright all the way from the first to the 12th road, each color is not the same (to increase to 3 controller)
Example 8: < instance 8. Exe > create a colorful gradient all the way from the first to the 12th road, every road is not the same color
Example 9: < instance 9. Exe > download effect to the controller (the controller connected to the computer with USB cable, the controller will bright lights, controller don't need to connect power, the software will automatically detect whether success is connected to the controller at this time)
