Click on the image to view the original image
12V 24V 1ft 300mm 0.3m 30cm 5W 12inch 12" F8T5 T5 LED Tubes For Bus Cars Railway Carriage
Replaces all F8T5, TL8W/29, and 90248 fluorescent tubes in Aqua Signal Series 15 Antibes and Malaga fixtures, as well as Thin-Lite Model 111, 112, 130, 192, 652, 732 and 742 fluorescent 12V boat or RV fixtures. It also fits the Seachoice # 06411, 06421 fixtures. In fact, this bulb replaces any 12" (11.75") x 5/8" T5 12V or 24V 8W tube.
China 225mm 300mm 531mm 12V DC LED Tube Light Unique Features:
It is used to replace existing Fluoro tubes in Motorhomes,Caravans, Cruise ship, RV, people don’t want to replace the whole unit as the screw holes never line up properly and the original ones have covers.
Take off the old T5 T8 fluorescent tube, then install this led tube light on the bracket fitting.
Its a replacement tube only, it has polarity sensitive as there are a number of ways the original fittings are wired up, some are positive one end and negative the other and also vice versa, some are negative and positive at one end and no wires at the other,
we take it one step further, to have the driver built inside the tube so the tube can run on 12-24VDC in whatever housing it is put into.
China 225mm 300mm 531mm 12V DC LED Tube Light Unique Models:
T5 Series, Patented DC12V-24V, G5 base, SMD3528 LED, No need ballast
| Model No. | Tube Size | Input Voltage (V) | Wattage (W) | Luminous Flux (LM) | Replace Light |
| LE-DCT5-225 | 225*Φ16MM | 12V DC, 24V DC | 4W | 350LM | Replaces: 9" F6T5 fluorescent tubes |
| LE-DCT5-300 | 300*Φ16MM | 12V DC, 24V DC | 5W | 440LM | Replaces: 12" F8T5 fluorescent tubes |
| LE-DCT5-531 | 531*Φ16MM | 12V DC, 24V DC | 6W | 550LM | Replaces: 21" F13T5 fluorescent tubes |
Besides,
we have 36V DC LED Tube Light,
and 12V DC 24V DC 451mm T8 LED Tube light to replace Replaces: 18" F15T8 fluorescent tubes, please contact me for more details.
Application:
Marine, solar systems, battery, other machines, motorhomes, caravans, boats, steamship, power shortage areas etc. and other places where working in DC low voltage)
NOTE:
These LED bulbs have our built-in constant-current driver already installed,
but they do not require the high-voltage ballast that is in your current fluorescent fixture. These are not for 120VAC home use.Only DC10-30V input voltge allowed.
Installations:
This is a double-end input T5 12" LED tube light with 4W total input power to replace 8W energy-saving fluorescent F8T5. It is not dimmable and works from 12-30V DC.
It's a 12-30V DC LED tube light, NEVER use it with AC 110/120VAC source unless you have an AC-DC converter to achieve 12-30V DC power. Please check your fixture voltage.
It must be directly wired to your 12-30V DC power from the two input ends on both sides without the use of any electronic ballast or starter.
MUST be directly wired to the 12-30V DC Power: Disconnect Ballast & Starter when installation.
Ideal for RV and Marine Lighting: To replace 12-30V DC F8T5 F6T5 F13T5 CFLs with Instant-On Warm White Cool White 3000K 4000K 6000K!
GREEN ECO FRIENDLY + SIGNIFICANT ENERGY SAVING + LONG LIFETIME: no flickering, no UV light, no buzzing ballast, no hazardous materials + Saving ~50% electricity + Lifetime>50,000hrs & 3-Year Warranty
