Shenzhen Signcomplex Limited

 Decorative Fancy Solar Sensor Modern Wall Pack Led  Lamp Bracket Outdoor Wall Light

Product  description :

Convenient installation,whole installation in 2 minutesLight effect up to 140lm/W

Compact structure, unique appearance Customized mold products,12W/24W available for selection With IP65,long-term outdoor use Light sensation control (option) PC lampshade optional (atomizing, milky white) Conventional color: black (bronze and white for option)

Technical parameters:

 ZYYrepresent specific model;
" Z" represent control function.It can be S (sensor control) only,or blank (no control function);
" YY" represents the sequential Number 0-99.

Features:

1. The unique installation design enables to install the products without dismantlingthe light so as to complete installation in 2 minutes;

2. The die casting aluminum alloys are firm, durable and reliable;

3. The surface is sprayed with outdoor sand grain powder to adapt to all types of
installation environments. Waterproof and corrosion resistance;

4. The stripe optical grade anti-UVPC atomization lampshade and milky white lampshade are
high transmittance with prevention of dazzling; uniform and soft light;
5. Aluminum kits heat dissipation with the light beads service life reaching 60000 hours;

6. Use environment temperature: - 20℃-40℃;
7. Anti-corrosion grade: W.

Specification:WPM-012/024-AW

Dimension:

Application:

Provides general illumination for outdoor use in residential and light commercial
applications personal warehouse. Ideal for entryways, walkways, side yards, patios,
and commercial buildings creating an comfortable exterior space as well as providing
safety and security.

Install drawing:

 

1. Take out the installation plate. Thread the AC wire from the wall through the wire outlet hole
of the installation plate. Use self-tapping screws to fix the installation plate onto the wall;
2.Wiring: for the convenience of wiring, the light may be hung in the hang groove of the
installation plate. Connect AC wire of the light with corresponding AC wire of the wall. The spring
screw connector in the accessory package may be used for connection or the professional
electrician selects other safe terminals;
3.Arrange the wire and pack them into the junction box. Align the screw hole at the side of the

light with the screw hole on the mounting plate. Use hand to tighten the screws.

.

1.Take out the installation plate. Determine the installation position by referring to the hole
position of the installation plate. Then fix it on the wall;
2.Wiring: Take off the end cap at the light bottom. Thread the user AC wire through wire outlet
at the light bottom. Then connect the AC wire of the light with corresponding user AC wire. The
spring screw connector in the accessory package may be used for connection or the professional
electrician selects other safe terminals;
3.Arrange the wire in order and pack it in the empty cavity at the light bottom. Align the screw
hole at the side of the light with the screw hole on the installation plate. Use hand to tighten the screws.

 

Packing information :

 

Power	Net weight	Gross weight	Dimension of inner box	Dimension of outer carton	Total weight
12W	0.9kg	1.0kg	145*77*230mm	800*250*315mm (20 pcs/carton)	21kg
24W	1.0kg	1.1kg	145*77*230mm	800*250*315mm (20 pcs/carton)	23kg

 

Installation requirements:

 

1.Power off before installation;lamp installation refer to specification or instructions;
2.Make sure installation material can endure the weight of lamp;
3.Connect the lamp wire to wire of power supply,and seal the joint with insulation;
4.No matter what kind of installation method,please make sure the lamp is installed
securely and won"t loose and fall.

 

Notice:

 

1.Please first read the product specification carefully,make sure the using environment
conform to specification, then it can be used;
2. Please confirm the input voltage before use;
3.This product must be installed by professionals;
4.If there is any damage to the power wire or shell of the product,it should be taken as
defective product and do not use it;
5.Dangerous high voltage,non-professionals are not allowed to maintain the product;
6.If external soft cable or soft wire of the light is damaged, it should be replaced by
manufacture or service agent or personnel with similar qualification to avoid danger;
7.Corrosivity in the using environment can"t exceed the anti-corrosion grade regulation,
if you have special requirement, please first consult with our company.

 

our services:

 

 

 

Authenticate:

 

 

company image:

 

Production Process:

 

 

contact us: