Click on the image to view the original image
277 volt ac to 12vdc triac dimmable led light driver match with lutron 277v led dimmer
Smarts Electronics offers 277vac Triac Dimmable led light driver from 100watts to 300watts available with isolated circuits and overload protection. AC phase-cut method using electronic type dimmers: leading edge and trailing edge TRIAC.What is more, the Slim Line series drivers are ETL listed for use in Canada and USA and covered by 5-year manufacturer limited warranty. Paired with relative junction box.
Model | SMT-012-150VTH | SMT-024-150VTH | |
Output | DC Voltage | 12V | 24V |
Voltage Tolerance | ±0.5V | ||
Voltage Tolerance | ±0.5V | ||
Voltage Regulation | ±0.5% | ||
Rated current | 12.5A | 6.25A | |
Rated power | 150W | ||
Input | Voltage Range | 100-277VAC | |
Frequency Range | 47~63HZ | ||
Power Factor ( Typ.) | 0.98@120VAC 0.95@277VAC | 0.99@120VAC 0.94@277VAC | |
Full Load Efficiency(Typ.) | >83% | >83% | |
AC Current(Typ.) | 1.8A@110VAC 1.32A | ||
Inrush Current (Typ.) | 15A, 50%, 1.4ms | ||
Leakage current | <0.50mA | ||
Protection | Short Circuit | shut down o/p voltage, re-power on to recover after fault condition is removed | |
Over load | ≤120% constant current limiting, auto-recovery | ||
TEMP .coefficient | ±0.03%/℃(0~50℃) | ||
Vibration | 10~500Hz, 5G 10min./1 cycle,period for 60min. each along X,Y,Z axes | ||
Over Current | ≤1.4*I out | ||
Environment | Working TEMP. | -40~+60℃ | |
Working Humidity | 20~90%RH,non-condensing | ||
Storage TEM.,Humidity | -40~+80℃,10~95%RH | ||
TEMP.coefficient | ±0.03%/℃(0~50℃) | ||
Vibration | 10~500Hz 2G 10min./1 cycle,period for 60min.each along X,Y,Z axes | ||
Safety&EMC | Safety standards | EN61347-1 EN61347-2-13 | |
Withstand voltage | I/P-O/P:3.75KVAC | ||
Isolation resistance | I/P-O/P:100MΩ/500VDC/25℃/70%RH | ||
EMC EMISSION | Compliance to EN55015,EN61000-3-2 (>50%load) | ||
EMC IMMUNITY | EN61000-4-2,3,4,5,6,11(Surge about 4KV) | ||
Others | Weight | 1.8Kg | |
Size | 260*103*46mm (L*W*H) | ||
packing | 440*295*145mm ,10PCS/CTN
| ||
Notes | 1. All parameters NOT specially mentioned are measured at 110VAC, 277VAC input , rated load and 25℃of ambient temperature. 2..Tolerance:includes set us tolerance,line regulation and load regulation . | ||
IP20 |
 | ||
Features
- Output constant voltage
- Input voltage range 100-277VAC
- Built-in PFC function / PF>0.97
- E fficiency > 85% / Dimming range: 0~100%
- Protections:short circuit/over voltage/over heat
- PWM output, does not change the color index
- IP620 design for indoor or outdoor installations
- Cooling by free air convection / Flicker-free
- Work with leading edge and trailing edge TRIAC dimmers
- Strong compatibility, flicker-free dimming
- Suitable for LED lighting and moving sign applications
- Compliance to worldwide safety regulations for lightings.
- Compatible with Forward phase, Reverse phase, Triac, MLV, ELV Dimmers
- 7 years warranty
Mechanical Specification
-Input:18AWG Black and White to be connected to AC L and N ,Green wire go ground,
-Output: Red is(DIM+),Black is(DIM-)
-Note: Any other requests we can customized.
Dimming Operation
-Output constant current level can be adjusted through input terminal of the AC phase line(L) by connection a triac dimmer.
-Compatible with Leading edge or trailing edge triac dimmers, but trailing edge dimmers work better..
-Please try to use dimmers with power at least 1.5 times as the output power of the driver.
Derating Curve
-To extend their life, please refer to the Derating Curve and derate according to the temperature.
Simple Connection Diagram
What kind of LED Driver/Power Supply Smarts Electronics do?
We specialized in constant voltage & current LED drivers, 010v/triac/DALI dimmable led drivers, enclosure power suppliers, power adapters.
- 1.Indoor LED illuminating lights
- 2.LED Neon, LED urban Decoration
- 3.LED Lighting Advertising,LED Display
- 4.Safety Protection Apparatus
- 5.Telecommunications, Networks
- 6.Vehicle Lights, Controller Panels
Our Market
Our major markets are in EU & North America,it takes about 85% markets share. view transaction history
Certifications
Our Services
What Service we can supply??
- 1.All inquiries will be replied within 24 hours
- 2.Professional manufacturer,welcom to visit our website
- 3.OEM/ODM avaliable:
- A.Print logo on our product;
- B. Customized specification;
- 4.After Sales-Service:
- A. All products will have 100% burn-in test and strictly quality test before shipping;
- B. Fast Delivery: 3-7days for samples, 15-20 days for bulk production;
- 5.High efficiency,long life span,reasonable&competetative price,fast lead time;
- 6.We have our engineer team, if you have any question about your LED applications, let us know freely.
FAQ
Q1. What's the trade terms you can do??
A1: We accept EXW,FOB..(Optional)
Q2. What's shipping mode can we choose?
A2: Express, Ocean and air transportation (optional).
Q3. What's the MOQ?
A3: Our MOQ is 1pcs. better price for large quantity;
Q4. What can you do if the product is broken?
A4: We promise to replace new ones to you if there is any defective happen during the warranty period.
Q5. Can i get products with my own logo??
A5: Sure, you can, MOQ is 500pcs.
Q6. Can i get a sample for testing??
A6: Sure, but sample fees should be charged on your account.
Q7. What's the mormal lead time??
A7: 7 working days for samples, 15 working days for mass production.
Q8. What's the payment conditon?
A8: T/T in advance or 30% deposit and 70% before delivery (optional)
Q9. What's the Payment do you have?
A9: We accept payment be sent via T/T, L/C, Trade Assurance, WESTERN UNION, PAYPAL.
Q10.How to contact with me??
A9: Skype: steven821228
Send your inquiry details in the below for professional reply.