- Place of Origin:
- china(mainland)
- Brand Name:
- SORBO
- Model Number:
- SB-6038-L10
- Outport:
- 5V
- Input:
- 5V
- luminous flux::
- 65LM
- Working time (solar charge for 1 hour) ::
- 15 min (test on the highest brightness)
- Working time(fully charged)::
- 5 hours (test on the highest brightness)
- Charge time::
- 4 - 6 hours
- USB charge voltage::
- 5V
- Size::
- 84.5mm*50mm
- Weight::
- 144g
- Battery::
- 800mAh / 3.7V NI-Mh battery
- Supply Ability:
- 20000 Piece/Pieces per Day
- Packaging Details
- Gift box or customer design
- Port
- Ningbo or Shanghai
2 IN 1 Camping LED Lantern USB Solar Rechargeable & Tent Flashlight
Working Principle
This product adopts the principle of solar-energy or via 5V adapter for power generation to charge its inner storage lithium battery. Its lampshadecan be folded up, and it can charge for digital devices (e.g. cell phone).
Switch models: low-brightness → high-brightness → SOS flashing → off. Used as flashlight or camp lantern.
Product Functions & Features
1) Lighting models: low-brightness, high-brightness, SOS flashing.
2) Solar-energy and adapter 5V for power generation.
3) Charge smart phone or digital products for emergency.
4) SOS emergency signal.
5) Can be used as flashlight without lampshade stretching.
6) With hanging handle.
7) Lampshade can be folded up, easy to carry.
8) Smart protection chip: over-charging protection, over-discharge protection and short circuit protection.
9) Solar power, green, environmental friendly, economy and safety.
10) High luminous.
Main Technical Parameters
1) Lighting
The Max. Luminous Flux of high-brightness as flashlight | ≥65Lm |
The Max. Luminous Flux of low-brightness as flashlight | ≥25Lm |
The Max. Luminous Flux of high-brightness as camping lantern | ≥63Lm |
The Max. Luminous Flux of low-brightness as camping lantern | ≥25Lm |
High-brightness lighting time after 1 hour charging under sunlight (500W/ M2 ) | ≥15Min |
Low-brightness lighting time after 1 hour charging under sunlight (500W/ M2 ) | ≥30Min |
LEDs flashing time after 1 hour charging under sunlight (500W/ M2 ) | ≥35Min |
High-brightness lighting time after being charged fully | ≥5Hr. |
Low -brightness lighting time after being charged fully | ≥10Hr. |
LEDs flash lighting time after being charged fully | ≥6Hr. |
Fully charged time by external power adapter | 4-6 Hr. |
2) Main parts life-span
The whole unit | ≥5 Years |
The plastic part | ≥5 Years |
3) Size and Weight
Product size (lampshade compression) | 84.3*50 mm |
Product weight | 144 g |
4) Others
Specification of built-in battery | 800mAh/3.7V Lithium battery |
Specification of charging plug | Micro V8 USB/5±0.2V |
External power input charge current | 400±50mA |
Solar panel (7500W/ M2 ) | Poly-Si 4.5V(floating voltage)≥50mA |
Rated output load voltage(load 500mA) | 5±0.5V |
Rated output floating voltage | 5±0.2V |
LED specification | High Power 1W white light 90-140lm |
Operation Method
1. Lighting:
Spread lampshade and press the switch to turn on/off the light, then fold up lampshade.
Switch models: low-brightness → high-brightness → SOS flashing → off.
2. Charging operation:
Charge its inside battery:
1). Charged by solar power: Put the solar panel upwards under the sunlight for charging.
2). Charged by adapter: Connect 5V adapter with V8 USB port, charge indicator will glow. When indicator turns green, it means that the battery has been fully charged.
3. Charge for digital devices:
Get USB port, then connect this product with mobile phone or other digital devices via connection cable.
4. Using of hanging handle:
Hang this product on the tent"s cord, also can hang in the hook, nail etc.
Cautions
1. Don’t point at eyes directly so as not to hurt the eyes.
2. In order to assure the using life of the battery and the mechanical parts, please pay attention to the instructions below:
a) In order to prolong the lifespan of the battery, you should charge it for at least once half a year.
4. Do not place this product in which temperature or humidity is high. Do not drop or hit this product.
5. Be careful to use lampshade, don"t spread too much.
6. Do not use this product in which temperature more than 50 degrees or 20 degrees below zero centigrade. Otherwise LED light source and the battery life will be reduced greatly.
7. We do not give notice again if the parameter of this product changed.
8. We reserve the final right to interpret this product.
1. Factory standard packaging is gift box, 50pcs for a carton.
Packaging can do as your request.
2. By sea FOB Ningbo or Shanghai
By air (DHL,TNT, DPS and so on)
1. OEM or ODM
2. Factory Price
3. High-end Desigh Package. Our own designer can help you design the packaging for free.
4. Fast Delivery. Deliver day is 15 days to 28 days (depend on inventory)
5. 100% QC inspection before shippment
6. Full Refund or Replacement for Qaulity Faulty
7. One Year Warranty
Why choose SORBO?
-Profesional,Strong Team Suppport your business