Click on the image to view the original image
Solar Powered & Cranking Rechargeable LED Lantern with FM Radio
1. CE+RoHS
2. High quality+competive price
3. Service of ODM & OEM
4.SAMPLES are available before order
Working Principle:
This product adopts the principle of solar-energy and crank for power generation to charge its inner battery. The internal professional design of variable speed drive mechanism drives a built-in AC, then through rectifier voltage convert to DC. This product adopts the high-quality digital processing system to accept FM radio. With high-sensitive radio, high-quality sound, built-in speaker.
Functions:
1. 6 LEDs lighting with high-luminance.
2. Solar-energy for power generation.
3. Cranking for power generating and accumulating in high-efficiency.
4. Charge other products via DC port.
5. With a metal handle to carry.
6. FM radio.(Have memories of previous frequency point and volume setting when you turn on radio next time.)
Features:
1. Solar and cranking to generate power, no external batteries needed, rechargeable power-storage: Green, eco-friendly, economical and safe.
2. Unique spotlight system (6LEDs), good for short and middle range distance lighting.
3. Perfect combination of the light weight and high efficiency. Low noise and long lifespan.
4. Adjustable volume speaker.
Main Technical Parameters:
1) Lighting :
The Max. Luminous Flux | 7 Lm |
Lighting time after 1 hour charging under sunlight (500W/ M2 ) | ≥25 Min |
Lighting time after 1 minute cranking | ≥15 Min |
Lighting time after full charger | 100 Min |
Fully charged time | 10 Min(Cranking) |
Note: Lighting discharge standard to luminous flux: 50mLm
2) Radio:
Sensitivity of the FM | Better than 10 uV |
Reception scope of the FM | 87.5~108 MHz |
Radio working time after 1 minute cranking (2.5 - 3 circles/s) | ≥ 5 minutes |
Radio working time after 1 hour charging under sunlight (500W/ M2 ) | ≥ 4 minutes |
Max. current flux of being charged by solar energy | 15mA (750W/ M2 ) |
Output charging current | 250~400mA |
3) Main parts life-span
Switch | ≥5000 Times |
The whole unit | ≥5 Years |
The plastic part | ≥5 Years |
4) Size and Weight
Product size | 76×76×180 mm |
Product weight | 230 g |
5) Others:
Specification of built-in battery | 120mAh, 3.6 V |
Diameter of built-in speaker | Φ36mm (one) |
Built-in antenna length | Φ4×60mm |
Operation Method:
Lighting:
Turn the switch at the bottom to “on”, then press the "LIGHT" switch to turn on or off.
Charged by solar power:
Put the solar panel upwards under the sunlight for charging.
Cranking for power:
Hold the unit and crank the handle by the other hand at the speed of 2.5-3 circles per second to charge its inside battery. Lock the handle after using.
Charge for digital devices:
Get DC port, then connect this product with mobile phone or other digital devices via connection cable. Unlock the handle, crank it at the speed of 2.5 to 3 circles per second.
Reception of radio:
A. Operation of the power switch: Turn the switch at the bottom to “on”, then hold and press the "RADIO" switch to turn on or off the radio.
B. Station Search: Press “SCAN+” or “SCAN-“ to search the radio program. Have memories of previous frequency point and volume setting when you turn on radio next time.
C. Volume adjusting: Press “VOL+” or “VOL-“ to adjust volume by single step. Hold and press switch can adjust by degrees
Note:
a. It is advised to turn the volume to the optimal position (be comfortable) when you listen.
b. Avoid places like high building, basement, etc as possible as you can, such places will badly influence the
effect of the reception. Leave far away from the induction cooker, fluorescent lamp, car generator, motor,
computer or such electrical equipment that may disturb the signal easily.
Cautions:
1. Don’t point at eyes directly so as not to hurt the eyes.
2. Pay attention to the holding gesture when cranking which can protect your finger and nail from hurting. Keep rotating steadily.
3. In order to assure the using life of the battery and the mechanical parts, please pay attention to the instructions below:
a) Do not crank it for more than 5 minutes when the power of the battery is enough (lighting normally) and less than 10 minutes when it runs out of power.
b) When the light is dim, it means the battery is lack of power badly, please turn off the light or crank it for a while.
c) Cranking it as even as possible (keep rotating steadily, 2.5 or 3 circles per second is best). Too slowly cranking would make current weak and influence the charging effeciency, and too violent cranking possibly damages the driving system.
d) In order to prolong the lifespan of the battery, you should crank it for at least one minute once a month.
4. Do not place this product in which temperature or humidity is high . Do not drop or hit this product.
5. Turn off the light when charging in order to enhance the efficiency of charging .
6. The product will be a little heated if cranking for a long time.
7. We reserve the right to change the specifications of the hardware and software described in this manual without prior notice.
If possible, please tell us what"s the purpose for using it, so that we can recommend you the best package. Of course with best price to you!
Any other request, please feel free to let us know.
OEM & ODM service is also avaiable
SAMPLES are avaiable before order
- Packaging Details: Goods will be packaged in factory standard Color Box.
Packaging can also be dedigned as YOU want.
- Delivery Detail: Goods will be delivered in 35 days after payment, samples, 1-7 days.
By sea FOB Ningbo or Shanghai
By air (DHL,TNT, DPS and so on)
Payment Terms: 30% deposit in advance, balance 70% before shipment
Sample cost and shipping charge to be paid 100% in advance.
Sample Price will be allowance up to 20%~30% than order price.
Before-sales Service
1. OEM or ODM
2.Your inquiry will be promptly replied within 24 hours
3.Well-trained and experienced staffs will answer your questions in fluent English
4. Competitieve Price. We can provide you with quite competitive price.
5. Free Packaging Design. Our own designer can help you design the packaging for free.
After-sale Service
1. 100% QC inspection before shippment
2. Fast Delivery. Deliver day is 15 days to 28 days (depend on inventory)
3. Full Refund or Replacement for Qaulity Faulty
4. One Year Warranty
5. Good after-sale Service
-Are you a factory or a trading company?
-We are a factory in Wenzhou city, Zhejiang Province.
- What"s your main product?
- We are a factory producing renewable energy product, such as dynamo flashlight,dynamo radio, solar lantern, solar power bank, camping lantern. We will launch new product every month.
- Do you attend any fair?
- We attend the 1-3th phase Canton Fair, Hongkong Electronics Fair and Consumer Electronics Show (CES)
- What"s your main market?
- Our main markets are America, European, South Africa and Janpan
- What Certificates do you have?
- Our products have been tested by CE and RoHS Sandards which is complied with the European Directive.
- Do you have any sales service?
- Yes, we do 1 Year Warranty for any of our products.
- How to contact us?
- Please kindly click the yellow buttom " Contact Supplier " and send us an inquiry,
or nonworking time(China time), leave a message on our Ali trade message.