Click on the image to view the original image
What our customers say about us:
Products Description
Features
Super brightness Módulo led Samsung.
Input voltage DC12V modulo led inyeccion,if your voltage not suitable for this led uber modulo led,please contact with me.
Color Rendering Index is 80,
Widely color temprature for your choose from CW,WW,W,R,G,B,Y.Pink
Our modul led with long lifespan,50,000hrs.
1. Wide applicability, easy to install and maintain
2. Extremely luminous, with wide viewing angle
3. Energy saving and environmental friendly
4. Various colors are available
5. Very bright and low power consumption
Super brightness Módulo led Samsung.
Input voltage DC12V modulo led inyeccion,if your voltage not suitable for this led uber modulo led,please contact with me.
Color Rendering Index is 80,
Widely color temprature for your choose from CW,WW,W,R,G,B,Y.Pink
Our modul led with long lifespan,50,000hrs.
China Supplier Светодиодный модуль Samsung 3 SMD 5730 led modules Epoxy 1.2W lens Waterproof 12V CE RoHS Korea Samsung led Module
Features for Korea Samsung LED Module
1. Wide applicability, easy to install and maintain
2. Extremely luminous, with wide viewing angle
3. Energy saving and environmental friendly
4. Various colors are available
5. Very bright and low power consumption
You can use the modulo led make the channel letters and signs.
We Are Factory
Support Product Customization
According To Your Requirements
You can tell me any led module you need.
We Are Factory
Support Product Customization
According To Your Requirements
You can tell me any led module you need.
Product name: | samsung Led Module | LED TYPE: | SMD 5730 |
Power: | 1.2w | Voltage: | DC 12V |
LED QTY: | 3 leds/pcs | Set: | 50pcs/set |
IP Waterproof Grade: | IP65 | Luminous Flux: | 110LM |
Item Dimension/SIZE: | 70*12mm | Emitting Color: | W/WW/R/G/B/Y/P |
Application: | Channel Letter,light-box | Customized: |
Installation Instruction for Korea Samsung светодиодные модули
1. Main power cable dimension: should exceed 2x1.5mm². To prevent damage from overheating caused by overload, the extended module cable (if necessary) should adopt dimension above 0.75mm²/18#.,Cable length between power and module should not be exceed 2m, if not it’ll suffer from power loss the total power consumption will also increased.
4. Take off the adhesive tape from the back of modules, stick them in the light box or advertisement board for initial settlement,
then fix the module by 2 piece of ST2.9x10 mm self tapping screws, or you can also fix the module by glass glue.
5. The standard number is 20 pcs for each string; they also can be cut off on customer’s requirement.
6. During the connection,using diagonal pliers to cut off power cable between modules, peel off the plastic around 10mm, wiring the cables and then connect them to their respective isolation port(the white-red cable heads to positive,the white cable for negtive).Do remember check the conductivity and reliablity of the cable after the connection, genernally, they can’t be pulled out of the port by middling force.
7. If there are extra cable for the string-end module, peel off the cable coat by 10mm (around)then connect then into isolation port.
8. To make sure that the waterproof and anti-corrosive reliability, grease some silicon glue (neutral glass glue or waterproof glue.) into the connection port for further protection.
9. Don’t touch the product when they are electrified.
10. Use reliable power driver that with certifications. (With short circuit protection, overload protection and over-current
protection.)
-This Корейский светодиодный модуль Samsung has 50pcs per chain,
-There are 3pcs super bright SMD5730 LED chip,
-Wire length 80mm spacing ,
-The DC in and out cable we connected together slow allows you put less so the voltage drop quite power cable during installation.
-Self-adhesive tape on each Módulo LED de Corea Samsung;
-Low heat, high brightness.
-Energy efficient, major reduction in power costs;
-Long service life more than 50000 hrs;
-without lead healthy, environmental friend
1. Main power cable dimension: should exceed 2x1.5mm². To prevent damage from overheating caused by overload, the extended module cable (if necessary) should adopt dimension above 0.75mm²/18#.,Cable length between power and module should not be exceed 2m, if not it’ll suffer from power loss the total power consumption will also increased.
4. Take off the adhesive tape from the back of modules, stick them in the light box or advertisement board for initial settlement,
then fix the module by 2 piece of ST2.9x10 mm self tapping screws, or you can also fix the module by glass glue.
5. The standard number is 20 pcs for each string; they also can be cut off on customer’s requirement.
6. During the connection,using diagonal pliers to cut off power cable between modules, peel off the plastic around 10mm, wiring the cables and then connect them to their respective isolation port(the white-red cable heads to positive,the white cable for negtive).Do remember check the conductivity and reliablity of the cable after the connection, genernally, they can’t be pulled out of the port by middling force.
7. If there are extra cable for the string-end module, peel off the cable coat by 10mm (around)then connect then into isolation port.
8. To make sure that the waterproof and anti-corrosive reliability, grease some silicon glue (neutral glass glue or waterproof glue.) into the connection port for further protection.
9. Don’t touch the product when they are electrified.
10. Use reliable power driver that with certifications. (With short circuit protection, overload protection and over-current
protection.)
-This Корейский светодиодный модуль Samsung has 50pcs per chain,
-There are 3pcs super bright SMD5730 LED chip,
-Wire length 80mm spacing ,
-The DC in and out cable we connected together slow allows you put less so the voltage drop quite power cable during installation.
-Self-adhesive tape on each Módulo LED de Corea Samsung;
-Low heat, high brightness.
-Energy efficient, major reduction in power costs;
-Long service life more than 50000 hrs;
-without lead healthy, environmental friend
Recommend Products
Recommend Products
Shipping&Packing
Company Profile
FAQ
1.What is your MOQ?
---MOQ always is 20pcs one sets for wholesale orders, You can also buy a sample.
2. How to deal with the faulty?
A:Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.
Secondly, during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.
3.How long does it take to manufacture once an order has been placed?
---It depends on the volume of the order.Most Online wholesales orders we ship within 1-5 working days after we receive payment.
4. What methods of payment do you accept for the full-order?
--Various payment methods are available, including via PayPal, Visa,MasterCard, Alibaba Trade Assurance,Western Union and T/T.
5. Is it possible to put our logo on your product or product packaging?
---Of course, we have a factory, welcome to customize such as your brand,LOGO,Color, Product Manual,packaging etc....
6.How Can I order?
---Has items in stock, Click "Start Order" and pay directly! (Input quantity, choose your country, then you can see total price)
Please do write your Name, Address, Zip code and Phone number for delivery!
7. Why did our Customers choose us?
---Reply < 3 hours.
Delivery time > 99%.
Quality Control > 99%
After-sales Service > 99%
100% QC inspection Before the timely delivery of the goods.
---MOQ always is 20pcs one sets for wholesale orders, You can also buy a sample.
2. How to deal with the faulty?
A:Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.
Secondly, during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.
3.How long does it take to manufacture once an order has been placed?
---It depends on the volume of the order.Most Online wholesales orders we ship within 1-5 working days after we receive payment.
4. What methods of payment do you accept for the full-order?
--Various payment methods are available, including via PayPal, Visa,MasterCard, Alibaba Trade Assurance,Western Union and T/T.
5. Is it possible to put our logo on your product or product packaging?
---Of course, we have a factory, welcome to customize such as your brand,LOGO,Color, Product Manual,packaging etc....
6.How Can I order?
---Has items in stock, Click "Start Order" and pay directly! (Input quantity, choose your country, then you can see total price)
Please do write your Name, Address, Zip code and Phone number for delivery!
7. Why did our Customers choose us?
---Reply < 3 hours.
Delivery time > 99%.
Quality Control > 99%
After-sales Service > 99%
100% QC inspection Before the timely delivery of the goods.