Click on the image to view the original image
Specification
Solar LED wall lamp | ||
Rated power | 5W | 10W |
Model | SM-WL016S1 | SM-WL016S1 |
Solar panel | 6V,3W | 6V,3W |
Battery | Lithium battery 3.7V,3000mAh | Lithium battery 3.7V,6000mAh |
Life span | 800 cycles | 800 cycles |
Charging time | 6-8 hours | 6-8 hours |
Discharge time | 12-36 hours(full power can work 17 hours) | 12-36 hours(full power can work 17 hours) |
LED chip | SMD5730(0.5W*10) | 10W(SMD5730*20) |
Lumen | >320lm | >640lm |
CCT | 3000K/4000K/5000K/6500K optional | |
Working temperature | 0℃-45℃ | |
CRI | Ra>70/80 optional | |
Remote control distance | 3-5 meters | |
Outdoor use, suitable for occasions: parks, courtyards, steps, garage walls, etc.
Features:
1. Zero electricity, no wiring, intelligent light sensing products;
2. High-quality polysilicon solar panels cut in one block, high conversion efficiency, long life of up to 25 years;
3. Built-in MPPT intelligent mode controller to improve charging efficiency by 50%;
4. Built-in lithium-ion battery, can be recharged 800 times;
5. High-efficiency LED lamp beads, life up to 50,000 hours;
6. Intelligent light control (automatic) and remote control two kinds of work modes;
7. Power (brightness), free control of working time;
8. IP64 protection level, effectively prevent dust and rain;
9. The lamp body can be used from the charging line to facilitate portability.
LED wall light:
Remote controller:
1. Main power switch, LED does not work after turning off
2. Enter automatic operation mode (light control mode)
3/4/5. Working time selection
6. Full power/half power options
7. Increased brightness
8. Decreased brightness
9. Battery compartment: 2 AAA batteries
1. During the day, when the ambient light is strong, the LED light is turned off, the solar panel receives sunlight, and the light energy is converted into electrical energy. The lithium battery is charged by the intelligent control system.
6When the sun is bright, the full charge time is about 6-8 hours
6In the charging state, the red indicator light flashes slowly, and when the charging is completed, the red indicator light is on;
2. At night, when the ambient light is weak, the LED turns on:
6Work mode, power, brightness, working time can be selected by remote control
6When the battery is full, it can connect work for 12-36 hours (full power can work for 17 hours)
3. Notes: 6The lamp body power switch must be kept open to enable the LED lamp to start normally.
6There must be no obstruction around the solar panel, and it should be fixed in the direction of the strongest light. It is recommended to install an elevation angle of 30 degrees.
6Solar panels should not be installed where there are other lights (such as street lights).
Size
Light Power | Product size | Solar panel | Solar panel size |
5W | 153*56mm | 6V 3W | 220*135*17mm |
10W | 153*56mm | 6V 6W | 270*180*17mm |
Suiming logo color box/OEM color box.
