Click on the image to view the original image
Two Part Epoxy Resin AB Glue 1:1 For LED Light Bar
Product Description
The epoxy resin AB crystal glue is the patent product of the company.Epoxy resin 1169AB can be cured under normal temperature and high temperature, with the feature of moderate viscosity, good flowing property, natural defoaming, anti-yellow, high transparency, no ripple, bright in surface, good flexibility.
Product Details
Properties before Hardening
| Part | 1169A | 1169B |
| Color | Transparent | Transparent |
| Specific gravity | 1.15 | 1.05 |
| Viscosity (25℃) | 700-1500CPS | 1200-1500MaxCPS |
| Mixing ratio | A: B = 100:100(weight ratio) | |
| Hardening conditions | 25℃×20H or 55℃×3H(2g) | |
| Usable time | 25℃×80min(100g) | |
Operation
1.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.
2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 ℃, please heat A glue to 30 ℃ first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.
3.When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing, suggest to use the heat curing.
Properties after Hardening
Hardness, shore D | 22 |
Withstand voltage, KV/mm | 3.7 |
Flexural strength, Kg/mm2 | 28 |
Volume resistivity, Ohm3 | 1x1015 |
Surface resistance, Ohmm2 | 5X1015 |
Impact strength, Kg/cm/ mm2 | 6.8 |
Induced electric loss, 1KHZ | 0.42 |
Moisture absorption, % | <0.1 |
Compressive strength, Kg/ mm2 | 8.4 |
Caution
1,The operating environment should be ventilative and should keep away from fire. Closely sealed after use.
2, Avoid eye contact, in case of contact, wash with plenty of water and get medical attention immediately.
3, If contact skin, wrap with clean cloth or paper, and wash it with water and soap.
4, Keep away from children.
5, Please take a trial before application to avoid usage mistake.
Storage And Shelf Life
1, Store at the temperature of 25°C or cool and dry place. Avoid from sunlight, high temperature or high humidity environment.
2, Use up as soon as possible when opened. It is strictly forbidden to expose to the air for a long time after it is opened to avoid affecting the quality of the products. The shelf life is six months in the room temperature of 25°C degree.
Applicatio 1169AB is designed specially used for LED strips, and clear drop glue for some labels, ornaments and stickers.
Product Show
Company Introduction
Shenzhen JINHUA Electronic Materials Co., Ltd. is specialized in epoxy resin and hardener with Secondary processing of high-tech enterprises.It is one of the most professional supplier of epoxy resin adhesive in current.And it is the most competitive, our company integrates R&D,development, production, sales and service into one of the professional firms. It has a more than 2000 square meter factory at pressent. Equipment introduction adopts international advanced technology and standards. Refer to excellent formula domestic and abroad, with high-performance raw materials in the United States, Japan, Germany and other places. All aspects of production have been strictly performance, environmental protection, health indicators test, and through the national authorities to detect certification,meet in the domestic industry-leading level.
Our company mainly produces crystal glue, epoxy resin adhesive, electronic potting glue, solar accessories, board resin glue, adhesive and other special grinding and etc...
Our company all stuff will uphold "honesty, harmony, innovation, rigorous" enterprise culture, adhere to the "management step by step, the eternal development" concept, constantly strive to forge ahead, innovation, all for customer needs as the center; all customers for the development of power; all customer satisfaction as the starting point; Jinhua hand in hand together with you, create brilliant!
Certificate
Packing & Shipping
FAQ
1, Why Choose Jinhuaglue?
1) Jinhuaglue owns ISO9001-2008 audited factroy of 3500sqm, all the materials are offered by factory directly.
2) Jinhua has R&D team, we accept OEM, and small order is acceptable
3) Jinhua has already ship to over 30 countrys, aboudant experiecnce on the exporting.
4) Jinhua with output of tons per day, ensure the fast on time delivery
5) Jinhua keeps all the samples for each shipment, so that to make the quality trackable.
2, What Kind of Quality Certificate Jinhua has?
1) REACH,
2) Rohs
3) CPSIA
4) ASTM
5) EN71
3 Does Jinhua has MSDS for shipment?
Yes, we do have MSDS for shipment all all our epoxy and PU resin
Regarding Take Delivery
Please check the goods before signing the goods, check the quantity, if there is any damage or not, please contact our company,we will our best to solve it!
Payment Terms
We support T/T,D/A,D/P,Western Union,Paypal or others convinent for customers that I could accept payment terms!
Our Services
FREE SAMPLE IS AVAILABLE!!!
Jinhua professional produce and market all kinds of epoxy resin AB glue which covers a very large range of applications: Soft AB glue for stickers, LED strip potting, badge, nameplate, nail cutters, keychain!!!
Hard clear resin for LED channel letters, photo frame coating, hand made diamond, jewelry, crafts, nacklace, bangles, bracklets, earrings, rings, miniatures such as simulated water, soup,lquid drinks and fishbows to be used in a child's dollhouse, anything you can image clear and shinning, but cheap and easy to operate!!!
Coating resin for surfboard, paddle, christmas ball, globe, foam products coating, bicycles, boats, golf clubs,skies, snowboards, swimming pool, garage, wood table coating, Epoxy flooring, to make it hard and durable!!!
Special ahhesion for wood, metal, glass, stone and some plastic.With very strong and high durable bond after cured!!!
Flexible potting resin for electronic products such as motors, generators, transformers, swithgeear, insulators, mold filling,LEDs, perfectly to protect the potting items from short circuit, dust, water, and moisture, and giving the potting items a more stable and longer life than unpotted products!!!
Pls contact us to discuss your application for a best EPOXY SOLUTION!!!
All of our products has ROHS, REACH, UL
CERTIFICATE!!!
