Click on the image to view the original image
1.Parameter
Description:
Two thermostats in one casing Thermost(contact breaker, normally closed) for regulating heaters Thermost (contact maker, normally open) for regulating filter fans and heat exchangers or switching signal devices when temperature limit has been exceeded Heater and cooling equipment can be switched independently from each other with a temperature offset as opposed to the usual change-over contacts
Specifications:
| Modul number | MFR012 |
MRF012
Specifications:
Switch difference:4% RH (±3% tolerance)
Permissible air velocity:15m/sec
Contact type:change-over contact
Contact resistance:< 10mOhm Service life:> 100 000 cycles
Min. switching capacity: 20V AC/DC 100 mA
Max. switching capacity: 250 VAC, 5 (1) A DC 20W
EMC: acc. to EN 55014-1-2, EN 61000-3-2, EN 61000-3-3 Connection:3-pole terminal for 2.5mm⊃2;, clamping torque 0.5Nm max.: rigid wire 2.5mm⊃2;,stranded wire (with wire end ferrule) 1.5mm⊃2;
Mounting: clip for 35mm DIN rail, EN50022
Casing: plastic according to UL94 V-0, light grey
Dimensions: 67 x 50 x 38mm
Fitting position: variable Operarting/Storage temperature: 0 to +60°C (+32 to +140°F) / -20 to +80°C (-4 to +176°F) Protection type: IP20
2.Product display
