Click on the image to view the original image
Lab -70C~180C Battery High Low Temperature Humidity Test Chamber with Many Sizes Optional
Introduction
Temperature humidity test chamber is used to test various types of materials for their tolerances of heat, cold, dry, humidity. It is applied for quality inspection for all types of electronic products, electric appliance, and products from battery, communication, instrument, automobile, plastic, metal, food, chemical, building materials, medical and aerospace industries.
Temperature and humidity testing help to determine the behavior of the components in severe test conditions and environments that involve fluctuating environment, high temperature, and different relative humidity. The tests can be done with constant temperature and humidity in a static state and can bedone in a dynamic state where the moisture is used to induce a failure of the components or materials.
Features
1.The constant temperature and humidity test box is mainly composed of control panel, distribution panel, insulation layer, air supply fan, heater, humidifier and refrigeration unit. The main specifications can be divided into 6 standard sizes and 10 specifications under different conditions.
2.The controller can be connected to the computer through LAN interface. Users can design programs on the computer screen, collect test data and records, call program execution, remote control machine switch and other functions.
3.The use of multi-wing air supply fan strong air circulation, to avoid any dead angle, so that indoor temperature and humidity distribution is uniform.
4.Complete safety protection device, if abnormal conditions occur, the controller screen will automatically display the fault status, cut off the power switch, and provide troubleshooting methods.
Model Availability
|
Model |
TMAX-80(A~F) |
TMAX-150(A~F) |
TMAX-225(A~F) |
TMAX-408(A~F) |
TMAX-800(A~F) |
TMAX-1000(A~F) |
|
Chamber Dimension (mm) |
400x500x400 |
500x600x500 |
600x750x500 |
600x850x800 |
1000x1000x800 |
1000x1000x1000 |
|
Machine Dimension WxHxD (mm) |
950x1650x950 |
1050x1750x1050 |
1200x1900x1150 |
1200x1950x1350 |
1600x2000x1450 |
1600x2100x1450 |
|
Temp. Range |
Low Temperature(A:25°C B:0°C C:-20°C D:-40°C E:-60°C F:-70°C) High Temperature 180°C, can also up to other high temperature
The temperature range can be customized/selectable |
|||||
|
Humidity Range |
20%~98%R.H.(10%-98% R.H. / 5%-98% R.H ,is a special optional condition, need Dehumidifier) |
|||||
Technical parameter
|
Chamber volume |
225L-1000L selectable |
|
Power supply conditions |
Require users to configure air or power switches of corresponding capacity at the installation site, and this switch must be used independently for the equipment.
AC380V power supply requirements: 1. Three-phase four-wire + protective ground wire; 2. Voltage range: AC(380±10)V 3. Frequency allowable fluctuation range: (50±0.5)Hz 4. Grounding resistance of protective grounding wire is less than 4Ω |
|
Maximum current power consumption |
Current: (13) A Power: 8.5KW [Voltage range: no more than (+10%)] |
| Humidity range | 20%-98% RH (the distribution range is as follows)
|
|
Refrigeration system |
1. The control system automatically adjusts the operation of the refrigerator according to the test conditions, so that the equipment is in the best energy-saving condition. 2. The refrigeration capacity of the evaporator is switched by the solenoid valve driven by the control system. 3. Compressor return air cooling circuit. |
| The cooling rate (no-load) |
About 1℃/min |
| The heating rate (no load) | About 3℃/min |
| Temperature stability | ±0.5℃ |
| Analytical accuracy of temperature | 0.01℃ |
| Precision of humidity control | ±2%R.H |
|
Temperature uniformity |
±2.0℃ |
|
Humidity uniformity |
≤±3%R.H(+2,-3%RH) |
| Observation Window | Observation sample use (W*L 28*35 cm) |
| Insulation Layer |
Rigid polyurethane foam its advantages are: 1. High efficiency and energy saving, seamless after filling, strong bonding after curing. 2. Seismic and compressive resistance, no cracking, no decay, no falling off after solidification. 3. It has ultra-low temperature heat conductivity, weather resistance and heat preservation. 4. High efficiency insulation, sound insulation, waterproof and moisture-proof after curing. 5. waterproof performance is good, because the foam hole is closed, the sealing rate is 95%, and the rainwater will not permeate through the hole. |
|
Chamber size |
500 *750 *600mm(W* H *D) |
|
Machine dimensions |
750 *1800 *1550mm(W* H *D) |
|
Net weight |
300kg |
Product Images
PACKAGE:
1 Standard exported package: Internal anticollision protection, external export wooden box packaging.
2 Shipping by express, by air, by sea according to customers' requirements to find the most suitable way.
3 Responsible for the damage during the shipping process, will change the damage part for you for free.
DELIVERY TIME:15-20 days after confirming order,detail delivery date should be decided according to production season and order quantity.