Click on the image to view the original image
|
High power injection moulding 5630 Samsung led module |
Specifications for High power injection moulding 5630 Samsung led module
1.Lighting source: 5730 SMD LED
2. Quantity of LED: 3 PCS
3. Operating voltage: 12V DC
4. Wattage: 1.2 W
5. Dimension: 78*13 mm
6. Forward current: 150mA
7. Waterproof grade: IP67 Epoxy resin
8. Viewing angle: 120°
9. Color: Various colors are available
Features for High power injection moulding 5630 Samsung led module
1. Wide applicability, easy to install and maintain
2. Extremely luminous, with wide viewing angle
3. Energy saving and environmental friendly
4. Various colors are available
5. Very bright and low power consumption
6. Long lifespan: More than 50, 000 hours.
| Item | Color | LED Quantity | Voltage | Wattage | size(mm) |
| EL-MDC03-CW-6 | Cold White | 5730-3pcs | 12V DC | 1.2W | 78*13mm |
| EL-MDC03-R-6 | red | ||||
| EL-MDC03-G-6 | green | ||||
| EL-MDC03-B-6 | blue | ||||
| EL-MDC03-Y-6 | yellow | ||||
| EL-MDC03-RGB-6 | RGB |
Application for High power injection moulding 5630 Samsung led module
1. Idea for in cabaret, cabinet, furniture, landscape, and architectural lighting
2. Channel-letter backlights, signboard, sign and decoration, and more high luminance efficiency and low power consumption
3. For cable and fixing hole
4. Channel letters backlighting
5. Advertisement signs acklighting
6. Advertisement light boxes backlighting
Installation High power injection moulding 5630 Samsung led module
1. Main power cable dimension: should exceed 2x1.5mm². To prevent damage from overheating caused by overload, the extended module cable (if necessary) should adopt dimension above 0.75mm²/18#.,Cable length between power and module should not be exceed 2m, if not it’ll suffer from power loss the total power consumption will also increased.
2. Adopt method 1, the maximum is 20 PCS. (Don’t over-connecting).
3. Adopt method 2, the maximum is 25 PCS. (Don’t over-connecting).
4. Take off the adhesive tape from the back of modules, stick them in the light box or advertisement board for initial settlement, then fix the module by 2 piece of ST2.9x10 mm self tapping screws, or you can also fix the module by glass glue.
5. The standard number is 20 pcs for each string; they also can be cut off on customer’s requirement.
6. During the connection,using diagonal pliers to cut off power cable between modules, peel off the plastic around 10mm, wiring the cables and then connect them to their respective isolation port(the white-red cable heads to positive,the white cable for negtive).Do remember check the conductivity and reliablity of the cable after the connection, genernally, they can’t be pulled out of the port by middling force.
7. If there are extra cable for the string-end module, peel off the cable coat by 10mm (around)then connect then into isolation port.
8. To make sure that the waterproof and anti-corrosive reliability, grease some silicon glue (neutral glass glue or waterproof glue.) into the connection port for further protection.
9. Don’t touch the product when they are electrified.
10. Use reliable power driver that with certifications. (With short circuit protection, overload protection and over-current protection.)
High power injection moulding 5630 Samsung led module:
0.012kg/pcs.
2000pcs/CTN
N.W: 24KG/CTN G.W: 25KG/CTN
Size for CTN: 52*30*40cm
1. Q: Can we get samples?
A: Samples are available for quality check and market test.
2. Q: What is delivery time?
A: 1-2days for samples order. 7-12days for quantity order.
3. Q: How does your factory do regarding the quality control?
A: we have a strong quality control team to guarantee our quality.
The quality control system: IQC→PQC→FQC→OQC.
Every process will be checked strictly.
4. Q: Aging Test
A: All the goods has at least 8 hours’ aging test 100% before sending.
5. Q: Do you have any for led light order?
A: 1 pc for sample checking also available, low MOQ can be acceptable.
6. Q: How do you ship the goods and how long does it take?
A: DHL,UPS,FedEx, TNT: 3-5days.
Airline and sea shipping also optional.
7. Q: Can you offer OEM and ODM Service?
A: Yes, we can offer OEM and ODM service.
8. Q: Do you have warranty for your goods?
A: Yes, we can offer 1-3 years warranty.
9. Q: How to deal with the faulty?
A: Our products are produced in strict quality control system and the defective rate will be less
than 0.2%.
During the guarantee period, we will send new goods with new order for small quantity. For
defective mass products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.