Click on the image to view the original image
Moso 105W LDP Prog Dimmable Outdoor Universal AC LDP-105R062 Alibaba Best Sellers LED DC 48 To 220V 60HZ
Universal input voltage / Full range: 90~305Vac;
Constant power design, outputs program
Output current reconfigurable by infrared controller;
3-in-1 dimmable (M types): 0~10V
Surge protection: 5KV line-line, 10KV line-earth;
Protections: SCP / OVP / OTP; temperature
IP67 design for indoor and outdoor applications;
Suitable for dry / damp / wet locations;
5 years warranty
Application
Suitable for LED architecture lighting, industrial lighting,
flood lighti
The LDP-105W series is 105W outdoor programmable LED driver that operates in constant current model. Monitored by an infrared based programming device, the fully programmed drivers offer all dimming options and a wide range of output current in a single driver, which deliver maximum flexibility with customized operating settings and intelligent control options for lighting manufacturers, as one driver can be programmed for many different luminarie designs. LDP provides built-in timer dimming schedules further increasing the energy savings and CO2 reductions achieved with LED lighting. It also helps clients to improve the management of logistics and stock. The compact metal case and high efficiency enables the driver to operating with high reliability, and extending product lifetime. Overall protection is provided against lightening surge, output over voltage, short circuit, and over temperature, to ensure low failure rate.
MODELS
Model Number
| Max Output Power (W) | Output Voltage Range (Vdc) | Output Current Adjustable Range (A) | Full Power Current Adjustable Range (A) [2] | Default Output Setting | Typical Efficiency [3] | Power Factor | |
115Vac | 230Vac | |||||||
LDP-105X062 [1] | 105 | 20~62 | 0.30~3.00 | 1.69~3.00 | 20~36V/2.91A | 90% | 0.99 | 0.96 |
LDP-105X150 | 105 | 60~150 | 0.14~1.40 | 0.70~1.40 | 60~75V/1.40A | 92% | 0.99 | 0.96 |
LDP-105X305 | 105 | 120~305 | 0.10~0.86 | 0.344~0.86 | 120~150V/0.70A | 90% | 0.99 | 0.96 |
Notes:
[1]. X can be M or R, means dimmable or non-dimmable. Take LDP-105X062 for example, LDP-105M062 is programmable and 3-in-1 dimmable; LDP-105R062 is programmable and timer dimmable;
[2]. Output current adjustable range with constant power at max output power;
[3]. All specifications are measured at 25℃ ambient temperature, if no specific note.
INPUT SPECIFICATIONS
Parameter | Min. | Typ. | Max. | Notes |
Input Voltage | 90Vac | 100-277Vac | 305Vac |
|
Input Frequency | 47Hz | 50/60 | 63Hz |
|
Leakage Current | - | - | 0.75mA | 277Vac/50Hz |
Input AC Current | - | - | 1.5Amax | 100-277Vac &full load |
Inrush Current(A) | - | - | 75A | 230Vac & full load |
Power Factor | 0.95 | 0.96 | - | 230Vac & full load |
THD | - | 15% | 20% | 115-230Vac, 70%-100% load,applicable to CE version |
- | 10% | 20% | 115-277Vac, 70%-100% load, applicable to UL version |
OUTPUT SPECIFICATIONS
Parameter | Min. | Typ. | Max. | Notes |
Output Current Tolerance | -5%Iset | - | 5%Iset | Full load |
Output Current Setting Range (Iset) LDP-105X062 LDP-105X150 LDP-105X305 |
0.30A 014A 0.10A | - |
3.00A 1.40A 0.86A |
|
Output Current Setting Range with Constant Power LDP-105X062 LDP-105X150 LDP-105X305 |
1.69A 0.70A 0.344A | - |
3.00A 1.40A 0.86A |
|
Total Output Current Ripple (pk-pk) |
| 10% | 16% | 230Vac & full Load,load is LED, ripple is different with difference LED load. |
Startup Overshoot Current |
| - | 10% | 115~277Vac & 100% Load,load is LED |
No Load Output Voltage LDP-105X062 LDP-105X150 LDP-105X305 | - | - |
80V 170V 340V |
|
Line Regulation | - | - | 1% | 25℃±10℃ ambient temperature, input voltage changes from 115Vac to 305Vac. |
Load Regulation | - | - | 3% | 25℃±10℃ambient temperature, 230Vacinput, load changes from 50% to 100%. |
Turn-on Delay Time | - | - | 3S | 115Vac,100% load |
- | - | 0.5S | 230Vac,100% load |
GENERAL SPECIFICATIONS
Parameter | Min. | Typ. | Max. | Notes | |
Efficiency @115Vac |
86% 86%
88% 88%
86% 85% |
88% 88%
90% 90%
88% 87% |
| Measured at full load and 25℃ambient temperature | |
LDP-105X062 | |||||
Io=1.93A | |||||
Io=3.00A | |||||
LDP-105X150 | |||||
Io=0.70A | |||||
Io=1.40A | |||||
LDP-105X305 | |||||
Io=0.344A | |||||
Io=0.86A | |||||
Efficiency @230Vac |
88% 88%
90% 90%
88% 87% |
90% 90%
92% 92%
90% 89% |
| Measured at full load and 25℃ambient temperature | |
LDP-105X062 | |||||
Io=1.93A | |||||
Io=3.00A | |||||
LDP-105X150 | |||||
Io=0.70A | |||||
Io=1.40A | |||||
LDP-105X305 | |||||
Io=0.344A | |||||
Io=0.86A | |||||
Efficiency @277Vac |
88% 88%
89% 89%
88% 87% |
90% 90%
91% 91%
90% 89% |
| Measured at full load and 25℃ambient temperature | |
LDP-105X062 | |||||
Io=1.93A | |||||
Io=3.00A | |||||
LDP-105X150 | |||||
Io=0.70A | |||||
Io=1.40A | |||||
LDP-105X305 | |||||
Io=0.344A | |||||
Io=0.86A | |||||
Input-Output | - | 3750Vac | - | 10mA/60S | |
Input-PE | - | 1600Vac | - | ||
Output- PE | - | 1600Vac | - | ||
- | - | 0.1Ω | 25A/60S | ||
50MΩ | - | - | Input-Output, Input-PE, Output-PE, 500Vdc/60S/25℃/70%RH | ||
MTBF | - | 200000 Hours | - | 230Vac,80% load (MIL-HDBK-217F) | |
Lifetime | - | 50000 Hours | - | 230Vac&100% load,70℃case temperature, refer to lifetime VS Tc curve for details | |
Operating Case Temperature for Safety Tc_s | -40℃ | - | +85℃ |
| |
Operating Case Temperature for Warranty Tc_w | -40℃ | - | +70℃ |
| |
Storage Temperature | -40℃ | - | +85℃ | Humidity: 10% to 95% RH | |
Dimensions (L×W×H)mm | 178*68*39 |
| |||
Net Weight | 750±50g/PCS |
| |||
Package | L500*W310*H60mm; Gross Weight: about 8.65Kg;10pcs/Ctn. | ||||
DIMMING
Parameter | Min. | Typ. | Max. | Notes | |
0~5V/0~10VAbsolute Maximum Voltage on the Vdim (+) Pin | - | 5V/10V | - |
| |
0~5V/0~10VSource Current on Vdim(+)Pin | - | - | 2mA |
| |
Dimming Output Range | LDP-105X062 LDP-105X150 LDP-105X305 | 10%Imax | - | 100%Imax | Imax=3.00A Imax=1.40A Imax=0.86A |
LDP-105X062 LDP-105X150 LDP-105X305 | 0.30A 014A 0.10A | - | 3.00A 1.40A 0.86A |
| |
Recommended Dimming Range for 0-5V | 0V | - | 5V | Default 0-10V/10V PWM Dimming | |
Recommended Dimming Range for 0-10V | 0V | - | 10V | ||
PWM_in High Level | 9.7V | - | 10.3V | ||
PWM_in Low Level | 0V | - | 0.3V | ||
PWM_in Frequency Range | 250Hz |
| 1000Hz | ||
PWM_in Duty Cycle | 1% | - | 99% | ||
1.Q:Can I have a sample order firstly ? what's your MOQ limit?
A: Yes, sample order is acceptable. And we do not have MOQ limi.
2.Q:What's about the lead time and shippment?
A: For common type like LDP series, APV LPV HLG ELG LRS DR MDR series, we have enough stock. Sample Order can be delivered within 2 days, Bulk Order can be delivered within 2~7 days after payment, not common type need 10~35 days after payment, for detail lead time, please contact our sales.
For shipping, we often use DHL, FedEx, UPS, and TNT. And they take 3-5 days to arrive. For bulk order, we recommend to send goods by Air or by Sea to save your transportation cost.
3.Q:How does your factory do regarding quality control?
A: Quality is priority.We always attach great importance to quality controlling for to the very end.Our factory has gained UL,ENEC,PSE,CCC,CB,CE,ErP,SAA etc authentication.
1. What we sell is 100% Genuine Mean Well Power Supply.
2. We are distributors and manufacturers in China.
3.Alibaba assessed 7 years Gold Supplier and 18 years of industry experience.
4.Inspected by the inspection Institution of Bureau Veritas Certification.
5.Price is negotiable if you have large quantity demand
6.100% QC inspection Before Shipping.
7.Best Quality & Best Service with Competitive price.
8.Shipping will be the most economical for you and freight cost is informed in advance for your consideration.decision for the shipping terms will be made according to your requirements.
Our Service:
Faster Response/Delivery:
17 hours customer service available from Monday to Saturday, 1-3 days complete sourcing requirements, finish OEM/ODM projects evaluation in one week.
We accept different payment method:
Alibaba Trade Assurance, T/T(30% before production, 100% when delivery),D/P,D/A, Western union, L/C, paypal,Escrow,Moneygram
Send your Inquiry Details in the Below,Click "Send" Now!