Click on the image to view the original image
Battery operated Ozone sterilizer ultraviolet LED light UV Lamp
How it Works
This product is a portable disinfection and sterilization lamp with a lithium battery charging function and a sensor switch function. It uses LED ultraviolet disinfection and sterilization technology with a sterilization rate of 99.9%. The product has no radiation and cares for your health anytime, anywhere.
Using the UV sanitizer
Our UV sanitizer could be powered on by a USB charger. It can be connected to USB for power supply. Press the on/off button, the lamp turns blue, you can use it to scan any place you want to disinfect.
1. Power on / off: press and hold the power button for 2 seconds to turn on. After powering on, press the power button in any mode to turn off.
2.There are three pre-set time functions: 10 minutes, 20 minutes, 30 minutes.
Press the power button, turn on the UV lamp and continue working, or press the other buttons to set the working time: 10 minutes, 20 minutes, 30 minutes. After 10mins or 20mins or 30mins, the indicator LED light will turn off and the device will automatically stop.
3. Infrared detection function: 3 seconds countdown in working mode to enable infrared detection; turn off the UV lamp when a human body approaches; if the human body movement cannot be detected within 10 seconds and the sterilization lamp continues to work until the set time. (Note: Intelligent infrared detection can not sense the static human body, please do not stay in the irradiation range during sterilization)
Application
This product uses 185-254 nanometer ultraviolet ray for sterilization, and the lamp produces ozone at the same time. Ozone performs 360-degree sterilization and deodorization for a variety of scenarios, such as cars, cabinets, kitchens, toilets, wardrobes, shoes, pet rooms, bedrooms , Living room, etc.
Under closed conditions, the sterilization effect is better.
Technical Parameters
|
Product name |
Portable Disinfection UV sterilization lamp |
|
Product material |
ABS Plastic |
|
Product Model |
GH-AG101 |
|
Rated input |
DC5V = 1.5A |
|
Battery capacity |
2000mAh |
|
Charging time |
2-3 hours |
|
Rate Power |
5W |
|
LEDUVC wavelength |
185-254nm |
|
Lamp life |
≥10000 hours |
|
PIR Sensor distance |
3 meters |
|
Tech of Sterilization |
UVC+Ozone |
|
Effective working area |
3m³ |
|
Body size |
240 * 40 * 40mm |
|
Body weight |
200g |
| Packing | Packing weight :0.25kg |
| Item size:20 * 4cm | |
| Unit packing size:24*8*7cm | |
| QTY/CTN:50pcs | |
| MEAS::48x41.5x33cm | |
| N.W./ G.W:12.5/13KG |
FAQs
Q: How long does it take to charge the unit?
Answer: Use the 5V1.5A charger for about 2-3 hours,
Q: Is a certain charger suitable for charging this product?
Answer: As long as the voltage output is 5V + 0.25V, the charger with current 0.8 ~ 3A will do.
Q: How to charge in the car?
Answer: Connect the charging cable to the 5V car charger, and insert the car charger at the cigarette lighter port to get power.
Q: How long can this product be stored?
Answer: If the battery is not used for a long time, the battery will consume power. Please charge the product once a month.