Click on the image to view the original image
XINWEI Machinery is manufacturing different types of injection moulding machines and range starts from 32 Ton to 2000 Ton. During the past 20 years, our machines had been exported to more than 60 countries.
- No extra energy consumption due to output volume changes according to the load, servo motor don' t work during cooling stage 0 consumption.
- Comparing with traditional injection moulding machine can save electricity 40- 80%.
- Pressure responses fast, quickly starts up to 0.05s.
- Compared to traditional injection molding machine the control system to respond will be 2-3 times faster.
- High response speed, shorten cycle times, improve production effi ciency.
- Products repeat accuracy can be increased to more than 5 thousandths, fully able to meet the requirements of ultra-precision injection molding.
1. Single line spiral plastic provided injecting equipment can process many products, plasticize in high capability, inject in high rate. and heat in material cartridge with cycles of electrical resistor;. It uses the cold screw protection equipment that he screw won’t rotate only if the heated temperature not reach the set value.
2. It uses five fulcrums double joint poles mold lock equipment to move at high and stable speed.
3. The safe gate takes electrical and mechanical double insured equipment (mold can’t be close when safe gate open) that makes the operation is safe .and stable.
4. The machine controlled by micro-computer which dominate rotation of hydraulic parts with automatic fault alarm runs stable and high automatized.
5. The hydraulic parts is set inside of machine, which makes the outer space more efficiently.
6. The machine is equipped multi-function hydraulic ejection device, which can be chosen in any case, being demould in a well proportioned.
7. The draw rod is made of good quality chromed steel that can make a longer life.
8. Hydraulic motor adjust mould device makes it easy and sound.
9. Special data storage (electronic ruler)
10. Hydraulic automatic adjust mold control.
11. The machine uses the import position switch or electronic ruler to control action in accuracy.
| XINCHEN EH19-258G SERVO ENERGY SAVING INJECTION MOLDING MACHINE SPECIFICATION | |||||
| Specification | Unit | EH19-258G | |||
| A | B | ||||
| INJECTION UNIT | |||||
| Screw Diameter | mm | 54 | 56 | ||
| Shot Size(Theoretical) | cm² | 720 | 770 | ||
| Injection Weight(Theoretical) | g | 650 | 690 | ||
| Injection Pressure | Mpa | 190 | 178 | ||
| Injection Rate | g/s | 200 | 215 | ||
| Screw L/D Ratio | L/D | 22.5 | 21.6 | ||
| Cscrew Speed | r.p.m | 180 | |||
| Nozzel Diameter | Srmm | 20 | |||
| CLAMPING UNIT | |||||
| Clamping Tonnage | KN | 2580 | |||
| Clamp Stroke | mm | 570 | |||
| Mould Thickness | mm | 220-580 | |||
| Space Between Tie-bars | mm | 580x580 | |||
| Ejector Stroke | mm | 160 | |||
| Ejector Tonnage | KN | 70 | |||
| Ejector Number | Piece | 9 | |||
| Hole Diameter | mm | 160 | |||
| OTHERS | |||||
| Heater Power | KW | 15.5 | |||
| Max Pump Pressure | Mpa | 16 | |||
| Pump specification | ml/r | ABT2T-80-5R02-Z21 | |||
| Servo Motor Power | KW | 31 | |||
| Valve Size | mm | 16 | |||
| Machine Size | m | 6.3x1.8x1.96 | |||
| Machine weight(Approx.) | t | 8 | |||
| Oil Tank Capacity | L | 350 | |||
| Platen Dimensions(Facing) |
|
||||
Injection Molding Machines widely used in Automotive, Packaging, Electrical, Medical, Household and Appliance sectors. In particular, increasing demand in emerging economies fueled the growth of the injection molding machine market.
