Click on the image to view the original image
Product Details
For RGB color LED strip
Compared with others RGB led strip, we use the double
loop in the circuit board, one led was broken, won't affect
other leds, the led strip will be lighten on as always.This
special design makes the RGB LED strip stabler than the
normal one. The lifespan will be longer too.
Application :
1) Architectural decorative lighting 2) Archway, canopy and bridge edge lighting
3) Amusement park, theater and aircraft cabin mood lighting 4) Emergency hallway lighting
5) Auditorium walkway lighting 6) Stairway accent lighting
7) Concealed lighting 8) Backlighting for signage letters
9) Channel letter lighting 10) Emergency exit path lighting
11) Cove lighting
1. Can be run in 220V or 120V without extra adaptor or power source;
2. Can be max run 50 meter and also be cut or connected in every meter or 0.5m;
3. PVC tube provides good waterproof and can be used both indoor & outdoor;
4. 120pcs 2835 LED per meter provide greater brightness;
5. Solid-state for high vibration resistance and good flexibility for any shape.
6. five nice color for your choce(blue,red,green,warm white cool white).
Chip
All the chips BET use good brand chip with 22-24 LM /per(5050),3528
7-8 lm,5630 50-55lm permeter, with
uniform light and low light decay with high quality and long life span, Two
years Guarantee, ETL, CE & ROHS
approved.
PVC
BET Strips use high transparent plastic material, It can bear high
temperature and with strong
anti-ultraviolet, While most of the
other normal strips only adopt muddy plastic material, this makes strips
Technology
The LED and resistors BET mounted
is with vertical mounted, while the
others is with horizontal mounted.
This will be not so easy to fall off
with the mounting when make
installing.
Copper Wire
BET Adopt pure cooper wire, With
super conductivity, Higher brightness and more uniform light.While the
common one only use the iron wire
with low material cost and poor
conduction.
PCB
The PCB width we adopt is with
8MM, While others is only with 5MM, wider PCB is better for heat
dissipation and protect the LEDS.
Craft
BET adopt advanced machine and
technology for every process, you
can see our BET’s PCB inside is flat
while other’s is curly.
Install
Take out the package,make sure it comes with necessary accessories,which should include : Fixing clips,Middle plugs,End caps,Head wires.
Fix the strips with clips onto where you need,put the wire into sockets to light the strips.
Cut
Please cut the strips only along the cutting mark on the PCB,don't cut at random.Block up the end with end caps,
seal with enough glue to make sure it is still waterproof.
Connect
Plug the head wire into a strip to conduct the electricity,or plug a middle plug into the ends of two separate strips to connect them into a long strip,after well connected,seal all the plugs with enough glue.
Notice
RGB color need to connect a controller (pls kindly check installation accessories and steps as below).
BETTER TECHNOLOGY
We are professional manufacturer of LED products in Shenzhen,China.The products have achieved CE&RoHS&ETL. Factory directly offers a competitive price with high quality.
COMPETITIVE ADVANTAGES
► Experienced technical staff
► Advanced equipment
► High quality
► Experienced R&D department
► OEM accepted
► Strong production capability
► Large scale production lines
► Clients' special requirement accepted
► Unique design
Warranty Term2 years since the date of purchase
1. Under the terms of this warranty, if the product have a failure occurs under normal usage within warranty period,we will provide free/rework new products.
2. If Failure or damage due to incorrect operation, wire connection, or anything other do not follow our instuction,BET will provide paid maintance within warranty period.
Q1. Quality Control
A:100% of the lamps will be tested and keep lighting for 24 hours to test its quality reliability , and we will also test its
temperature after 24 hours’ lighting.
Then after it is cool we again test 100% of the lamps to see if it still work well . Each lamp should pass all these QC
procedures before shipping to customer.
Q2. Order infomation
A: MOQ: Normally 200 meter
Trade term: EXW / FOB ShenzhenDelivery time: 3-5 working days for sample order, 7-10 working days for mass order
Q3. Package
A: For high voltage LED strip: 50 meter/ roll,two rolls in to a standard export carton;
For low voltage LED strip: 5 meter/roll ,40 rolls in to a carton;
We can custom the package as your requirement.
Q4. Trade Terms
1. Payment term: T/T 100% payment in advance, or for over 10,000 USD, TT 30% deposit after order confirmed,the
balance after goods ready before shipping .or Western Union, Paypal for small amount .
2. Lead time : normally in 10~15 days after deposit received .
3. Sample policy : Samples are always availble for each model . Samples can be ready in 3~7 days once payment
received .
4. Shipping port: Shenzhen , China
5. Discounts : We offer discount for big quantity .