Click on the image to view the original image
Novastar MRV300-1 LED Display Receiving Card
Products Description
Features
1. The MRV300-1 is a new receiving card developed by NovaStar. A single MRV300-1 loads
up to 256x256 pixels.
2. The MRV300-1 supports pixel level brightness and chroma calibration, which effectively
removes color difference, greatly improves display consistency of LED images, and
presents finer displays to users.
3. Software and hardware designs of the MRV300-1 have fully concerned users'
deployment, operating and maintenance scenarios, enabling easier deployment,
more stable operating and more efficient maintenance.
Hardware design:
1. Integrates 2 standard 50P connectors, which can work with any 50P HUB board; support single color, dual color, and full color LED display.
2. Adopts the Gigabit Ethernet port, which can connect to the PC.
Software design:
1. Supports pixel level brightness and chroma calibration.
2. Supports setting of images pre-stored in the receiving card.
3.Supports status detection of temperature, voltage, Ethernet cable communication and video source signals.
4. Supports the 5-pin LCD module.
Features
1.Pixel level brightness and chroma calibration
Working with NovaLCT and NovaCLB, the receiving card supports 12-bit precision brightness and chroma calibration on each LED, which can effectively remove color discrepancies and greatly improve LED display brightness and chroma consistency, allowing for better image quality.
2.Mapping function
After the Mapping function is enabled in NovaLCT, each of the target cabinets will display the receiving card number and Ethernet port information, allowing users to easily obtain the location and wiring route of receiving cards.
3.Quick seam correction
Working with NovaLCT, the receiving card supports quick adjustment of bright and dark lines caused by splicing of cabinets and modules. This function is easy to use and the adjustment takes effect immediately.
Working with NovaLCT, the receiving card supports quick adjustment of bright and dark lines caused by splicing of cabinets and modules. This function is easy to use and the adjustment takes effect immediately.
4.Voltage and temperature monitoring
The voltage and temperature of the receiving card can be monitored without using peripherals. The monitoring data can be checked in NovaLCT.
The voltage and temperature of the receiving card can be monitored without using peripherals. The monitoring data can be checked in NovaLCT.
5.Cabinet LCD
The receiving card supports the LCD connected to the cabinet. The LCD can display temperature, voltage, single operating time and total operating time of the receiving card.
The receiving card supports the LCD connected to the cabinet. The LCD can display temperature, voltage, single operating time and total operating time of the receiving card.
6.3D function
When the receiving card works with the independent controller which supports 3D function, users can enable the 3D function in NovaLCT or on operation panel of the controller, and set 3D parameters to allow for 3D display effects.
When the receiving card works with the independent controller which supports 3D function, users can enable the 3D function in NovaLCT or on operation panel of the controller, and set 3D parameters to allow for 3D display effects.
7.Bit error rate monitoring
The receiving card can work with NovaLCT (V5.2.0 or later) to monitor the network communication quality between sending device and receiving card, or between receiving cards, and record the number of erroneous packets to help troubleshoot network communication problems.
The receiving card can work with NovaLCT (V5.2.0 or later) to monitor the network communication quality between sending device and receiving card, or between receiving cards, and record the number of erroneous packets to help troubleshoot network communication problems.
8.Individual Gamma adjustment for RGB
Working with NovaLCT (V5.2.0 or later) and the independent controller which supports this function, the receiving card supports individual adjustment of red Gamma, green Gamma and blue Gamma, which can effectively control image non-uniformity under low grayscale and white balance offset, allowing for a more realistic image.
Working with NovaLCT (V5.2.0 or later) and the independent controller which supports this function, the receiving card supports individual adjustment of red Gamma, green Gamma and blue Gamma, which can effectively control image non-uniformity under low grayscale and white balance offset, allowing for a more realistic image.
9.Readback of firmware program
In NovaLCT (V5.2.0 or later), the receiving card firmware program can be read back and saved to local computer.
In NovaLCT (V5.2.0 or later), the receiving card firmware program can be read back and saved to local computer.
10.Readback of configuration parameters In NovaLCT, the receiving card configuration parameters can be read back and saved to local computer.
Company Profile
Package & Shipping
Our Advantages
FAQ