The aluminum veneer art ceiling is a reprocessed product. Through various processes, the aluminum veneer ceiling board skillfully integrates various unique patterns, textures, and colors into the aluminum ceiling. Generally speaking, there are many art ceilings on the market at present. They are printed on the laminating board or roll coating board. The color of their gusset board materials is mostly white. When they are made, several finished aluminum veneer ceiling boards are spliced with keel, and then printed on these aluminum veneer ceiling boards in a way similar to "spray painting" or "photo-realistic". Home decoration is more commonly used, and the plate for tooling is different from the home decoration plate. First, the area of tooling plate is larger, and the thickness is about 1 to 3 mm more than home decoration. To choose the aluminum veneer ceiling plate, there is 7 basic knowledge of aluminum veneer ceiling plate installation that must be known.
The Aluminum Veneer produced by BANGLI
1. To use an aluminum veneer ceiling integrated ceiling, we should know what is the integrated ceiling?
The integrated ceiling can be simply said that the combination of heating, ventilation, lighting, and ceiling through a new design, let the traditional aluminum veneer ceiling plate add artistic connotation, and improve the actual functional value of decoration aluminum veneer ceiling plate.
2. When installing the ceiling, you may not know how high is the aluminum veneer ceiling plate from the roof?
The simplest way is to effectively seal the above pipelines, as long as there is enough space for electrical appliances. Then, the ceiling should be lifted as high as possible to leave more space for life. (Note: the minimum distance of ceiling is 5-10cm for reference)
3. When aluminum veneer ceiling plate decorates, can encounter this kind of problem, condole ceiling and ambry install first where?
According to the experience of many years of our company's installation technicians, it is generally to make an aluminum veneer ceiling plate first and then install the cupboard, because the level and height of the cupboard are determined according to the ceiling. But if we make the cupboard, the height of the cupboard wants to reach the ceiling. For the same horizontal line, it is necessary to do well in the hanging cabinet first, and then in the ceiling.
4. Due to the different use of aluminum veneer ceiling plates, there is a problem of whether exhaust is needed?
To be exact, the exhaust is very necessary for the ceiling. The hall or spacious location must be exhaust. Otherwise, the air is not circulating or the turbid air is too heavy. Especially in the toilet, the peculiar smell and moisture must be discharged. Therefore, the toilet exhaust fan is a must choice, with the function of exhaust and air exchange.
5. How many times does the aluminum veneer ceiling plate need to be measured before installation? Is it better to test more times or fewer times? Does it need to be retested?
These problems make many people tangle up and waste more time and energy, and they are afraid of missing problems. It is very responsible to say that under normal circumstances, after the wall tiles and floor tiles are pasted, one-time accurate measurement is enough. Because the best distance is measured after the wall tiles and floor tiles are pasted.
6. How thick is the aluminum veneer ceiling plate suitable?
In fact, the thickness of the aluminum veneer ceiling plate is not the standard to measure the quality of the plate. The material and surface technology are the core values. And the thickness of the tooling plate is worth noting. The area of the tooling plate is larger than that of the home panel, and the stress area is larger, so the thickness is important. The aluminum veneer ceiling plate for home decoration is generally 0.5mm thick / 0.6mm thick / 0.7mm thick, and the 0.8mm thick plate is generally used for tooling.
7. Do you need to put the fume hood on site before installing the aluminum veneer ceiling plate on the ceiling?
Don't worry about this at all, just make a change of air hole, and then bring the smoke pipe of the lampblack machine. When installing the ceiling, the smoke pipe will be embedded at the same time.
The above are the seven questions that are often asked by customers summarized by Bangli. I hope they can help you! Bangli, specializing in the production of all kinds of building curtain wall materials for 20 years, involving cap wall cladding panel, aluminum veneer, aluminum honeycomb panel, color-coated roll aluminum coil, perforated carved aluminum plate, and other products, welcome to the customization consultation, Bangli building materials will serve you wholeheartedly!
Zhaoqing BANGLI Building Material Industrial Co., Ltd.