Abalone are marine snails, it is widely considered to be a desirable food, and is consumed raw or cooked by a variety of cultures. Abalone drying is unlike other food drying, it can not use high temperature to dry it. The IKE abalone dehydrator can dry abalone at low temperature, which will not damage the protein in abalone, also can better keep the nutritional value and extends their storage life.
How to dehydrate abalone
by IKE food dehydrator
Ingredients: abalone
Directions:
1. Choose fresh abalone and remove it’s cap, then slices it into 3~5mm.
2. Put abalone on the 65 degrees water for 3 minutes.
3. Take abalone out from water and lay them on trays and dry the water on the surface.
4. Set the temperature to 35 degrees, humidity 40%, and dried for 4 hours.
5. Then rise temperature to 40 degrees, set the humidity 25%, and then drying for 6 hours.
6. Stop the dehydrator for 2 hours. Then set 48 degrees, humidity 15%, drying time for 10 hours will finish the abalone drying process. If the abalone is smaller, you can shorten the time.
The dried abalone will regain moisture when they are in direct contact with the air, so a sealed package is required. If you use vacuum packaging, you can better preserve it.
dried abalone
IKE Abalone Dehydrator - Click to Choose
Commercial WRH-100G Heat Pump All-in-one Abalone Dehydrator
Capacity: 20~100kg per batch
Machine Dimension (L*W*H): 1180*680*1800MM
Power supply: 220V, 50Hz/60Hz
Drying Temperature: 50℃~80℃
Commercial WRH-100G abalone dehydrator just needs to connect the power to use, is the easiest operation heat pump abalone dehydrator. WRH-100G abalone dehydrator used heat pump technology for energy saving. Drying takes place in a closed system, which makes your abalone clean and sanitary. View Equipment →
Commercial WRH-300GB Heat Pump All-in-one Abalone Dehydrator
Capacity: 100~350kg per batch
Machine Dimension (L*W*H): 1880*980*2100MM
Power supply: 220V, 50Hz/60Hz
Drying Temperature: 50℃~80℃
Commercial WRH-300GB abalone dehydrator also just needs to connect the power to use. Its capacity is more than WRH-100G abalone dehydrator. WRH-300G abalone dehydrator also used heat pump technology for energy saving. Strong wind parallel penetration, better drying effect, and higher uniformity. View Equipment →
Commercial AIO Series Heat Pump All-in-one Abalone Dehydrating System
Capacity: 400~1500kg per batch
Power supply: 220V/380V, 50Hz/60Hz
Drying Temperature: 50℃~80℃
Commercial AIO series abalone dehydrating system also just needs to connect the power to use. Customers do not need to install the machine. Commercial AIO series abalone dehydrating system is the largest and most convenient all-in-one drying machine. Customers can customize the accessories according to actual needs. View Equipment →
Industrial Heat Pump Abalone Dehydrating Room
Capacity: 200~1200kg per batch
Power supply: 220V/380V, 50Hz/60Hz
Drying Temperature: 20℃~80℃
After constructing an insulated drying room, push the main food dehydrator machine into the drying room and simply connect the power cord to work normally. IKE industrial abalone dehydrating room has no external configuration. The abalone are dehydrated in a completely sealed space. You just need to put the abalone on the rack and then moved them into the drying room. View Equipment →
Customized Conveyor Mesh Belt Large Abalone Dehydrator
Capacity: customized
Drying Temperature: 20℃~80℃
IKE conveyor mesh belt abalone dehydrator is automatic continuous drying equipment for large-scale dried abalone production. The abalone dehydartor production line can be equipped according to the user’s requirement and the production demands. View Equipment →