Dc inverter technology is becoming more and more popular nowadays.
Why dc inverter air source heat pump became more and more popular?
As far as we know, thanks for the dc inverter technology, it make our OSB air source heat pump inverter model with difference frequency for heating.
The dc inverter technology can change the frequency from 50 Hz to 120 Hz as per the heating demand. In other words, it is possible to adjust the compressor capacity at any time according to the environment. The inverter compressor will always on, but it could run at the faster frequency when heating demand is big, and run at the lowest frequency when heating demand is small.
Compare to on/off heat pump, which compressor stop when heating reach the set point, and re-start when heating is need.
The inverter heat pump could be more energy saving, and with 1-2 temp difference only.
Much comfortable.
We got quite a lot of inquire about the air to water heat pump with inverter compressor.
Up till now, there are a couple of air to water heat pump with inverter available, such like 11kw , 15kw, 19kw and 22kw heating model.
See more about our technical data for OSB dc inverter air source heat pump as below
Sure you can get better understanding what we have.
Let us recap more key feature about this our DC inverter air source heat pump.
1. Side fan monobloc design with white galvanized casing
2. Single phase (230v ) fit for 50hz and 60hz area.
3. Rated heating capacity range from 11kw to 22kw at air temp 20 deg c
3. Outstanding performance for floor heating.
4.High COP
5 hot water maximum 40 deg c (adjustable)—That means it is possible set the hot water as per your desire temp.
6. Famous inverter rotary compressor in bulit
7. Use 4-WAY VALVE, expansion valve and tube in shell heat exchanger
8.Automatic defrosting
9. Powerful LCD digtial controller which group control function available--which make it possible to control maximum 16 heat pumps at the same time.
10.Environmentally friendly refrigerant of R1410
11.Timer on off function
12.Safety air switch.
It mainly design for floor heating appliance, as Under floor heating is very common room heating in all over the world.
It is comfortable when the floor is heating and made the room warm.
User’s may set the room temp as 22-25 deg c, while water set point temp need to keep as 35- 45 deg c.
With OSB DC inverter heat pump air to water, with less temp difference, and room temp could be kept constantly and feel more comfortable.
That’s why we got a lot of demand for DC inverter heat pump air to water
for underfloor heating.
And gain a lot of happy client for that the air source heat pump with inverter.
Not only it save more energy, but it is can fit for 50hz and 60hz area.
It help to reduce the heat pump stock, and reduce their stock cost and management cost as well.
We are happy to offer the air source heat pump cost for your heating project.
And help to find the right model to meet the heating demand for your project.
For further info about technical data for our DC inverter air source heat pump, feel free to email us.