During the end of the year, it is the busy season for air to water hot water heat pump.
OSB workshop is busy with the Air to water hot water heat pump production.
As you may know,There are domestic heat pumps from 3kw, 5kw, 7kw, 9kw and 13kw with 230v.
In this year, 17kw and 19kw with 230v are available.
Commercial heat pump from 19kw, 24kw, 40kw, 60kw, 78kw with 380v are available.
All OSB air to water hot water heat pump able to offer maximum 60 deg c hot water , they are heating up the the cold water inside a stand-alone storage tank and the water that circulate through the heat pump to reach desire set point temp, and then store the hot water for later use.
As air to water hot water heat pump is air source heat pump, it collect heat from the outdoor air,
Which could be affected by ambient temp, the higher air temp, the more heat can be transfer, and the higher heating capacity and performance. In that reason, it is highly suggested to let the heat pump heating up the water at noon, when there with the highest performance.
OSB gair to water hot water heat pump is circulation heating, not direct heating, it takes several hours to heating the water from 10 deg c to 55 deg c.
When temp reach desire temp, The geyser heat pump water heater will stop heating (you may see compressor stop, fan stop running), until water tank temp drop to desire temp -5 deg c.
(e.g your expected set point temp is 55 deg c, then 55-5=50 deg c, in other words, heat pump will re-start for heating when tank temp drop to 50 deg c)
Timer on/off function in built the heat pump, which ensure you to set the heat pump for heating a few hours before taking shower at night or in the morning.
For details spec our, air to water hot water heat pump, feel free to email us.