With the rapid development of curtain wall aluminum industry and building decoration materials in recent years, the demand for fluorocarbon spray coating for fluorocarbon aluminum veneer and aluminum profile is obviously increased than before.
Any product, advanced and backward production equipment is an important factor to determine the quality of products. BANGLI ceiling aluminum veneer manufacturers not only have strict quality control in the early stage of surface treatment, spraying process and curing process, but also introduce advanced Japanese Lanshi spraying production line to walk on the lifting of workpieces. Clean, spray several times, solidify until the product is finished, ensure the color difference and film thickness uniformity.
PVDF Painted Aluminum Veneer by Bangli Building Material
Fluorocarbon aluminum veneer is used more and more often in the airport, subway, Auto City, shopping mall, and so on. No matter where you go, you can see it. Sometimes, when you see some exterior walls using the aluminum veneer of building curtain wall, you will find that some aluminum veneers will have different color blocks, which is the phenomenon of fading. This kind of fading phenomenon seriously affects the decoration effect of the whole aluminum curtain wall, so what causes the aluminum veneer to fade? The chemical structure of the fluorocarbon base material of the Bangli ceiling is combined with fluorine/carbon bond. The stability and firmness of chemical structure make the physical properties of fluorocarbon coating different from that of common coatings. Fluorocarbon spraying has excellent anti-fading, anti frosting, anti-air pollution (acid rain, etc.) corrosion, especially in the harsh climate and environment shows long-term anti-fading, anti UV performance.
If the aluminum veneer is used outdoors, it needs to face a variety of severe weather tests, such as acid rain, salt fog, wind and rain, direct sunlight, and so on. These factors seriously test the weather resistance and corrosion resistance of aluminum veneer. However, to be honest, the fading phenomenon is indeed a problem often encountered in the aluminum veneer industry, which is reflected by customers in daily work.
Detail Photo of Aluminum Solid Panels
The following aluminum veneer manufacturers on a simple analysis of the causes of this phenomenon.
First, the main painting process of aluminum veneer processing is electrostatic spraying technology, but the paint quality will have a very important impact on the service life of aluminum veneer. Some aluminum veneers appear obvious fading phenomenon soon after installation. A large part of the reason is that aluminum veneer manufacturers choose inferior paint for spraying for their own profits.
Second, the electrostatic spraying process is not standardized, resulting in the thickness of the paint film is not enough. The thickness of the paint film can not reach the corresponding national standard, which results in the service life of aluminum veneer greatly reduced, which is also one of the important reasons for the aluminum veneer fading phenomenon.
Thirdly, the paint spraying on the surface of aluminum veneer is not even enough, and it is not paid attention to during the quality inspection, which leads to the problem of aluminum veneer leaving the factory, which affects the decoration effect of the whole curtain wall in the later stage.
Different Patterns & Finishes of Aluminum Veneer
Therefore, in the process of aluminum veneer processing, we must strictly follow the corresponding requirements for standardized operation, select high-quality paint products, strict quality inspection procedures, to ensure the excellent quality and effect of aluminum veneer products. And customers also need to communicate with aluminum veneer manufacturers in time to solve the problem as soon as possible.
Bangli building materials suggest that when selecting aluminum veneer manufacturers, we must investigate the advanced level of production and fluorocarbon spraying equipment. We should not only seek low prices but also select some aluminum veneer manufacturers with the low qualified rate of aluminum veneer products, which will affect the construction period. Advanced fluorocarbon spraying equipment is the guarantee of aluminum veneer product quality.
Aluminum veneer, aluminum veneer curtain wall, fluorocarbon aluminum veneer, aluminum veneer price, fluorocarbon curtain wall aluminum veneer, indoor and outdoor aluminum veneer, aluminum ceiling manufacturer, hanging sheet aluminum ceiling, strip buckle aluminum ceiling, U-shaped square groove aluminum ceiling, honeycomb panel aluminum ceiling, grid aluminum ceiling, round aluminum ceiling
Bangli building materials is a modern enterprise specializing in the production of indoor and outdoor aluminum veneer, aluminum ceiling, hanging sheet aluminum ceiling, strip buckle aluminum ceiling, U-shaped square groove aluminum ceiling, honeycomb panel aluminum ceiling, grid aluminum ceiling, round aluminum ceiling, aluminum profile processing, and spraying. Bangli Building Material is looking forward to your inquiries.