We are happy to update you about the commercial pool heat pump with 60hz.
Which with metal white/grey color, and stainless steel 304 casing optional , high COP, and with heating/cooling and auto mode.
As you may know well our pool heat pump already with set point to be 0.1 deg c, wifi smart control function. Auto restart function, anti freezing function and so on.
Is there any new in the commercial pool heat pump 60hz?
Sure, Parallel control function is available.
It is possible to control maximum 16 heat pumps at the same time by just one single controller.
And switch on/off, adjust one parameter in the controller, then all 16 heat pumps could be received the request to switch on/off, or running at that request set point.
What’s more, with 100% heating demand, all heat pumps could be working to reach the set point at shortest time.
But when heating demand drop to 70%, PCB/Controller will check and switch on some heat pump units. Make only 70% heat pump to work.
While heating demand drop to 50%, PCB/Controller ask more heat pump to stop.
Much more intelligent than other kind of PCB/controller.
The last but not least, There is a app (ylink) , which able to control our heat pump with smart phone.
You may see the surface as below.
This smart group control app no need to use wifi, as there is wifi mould in built the controller.
As long as you search for the hotpot of ylink and connected it.
After all heat pumps been installed and well connected with power supply.
It can easier control the heat pump by this app (ylink).
On the app, you can set the timer on/off, change the temp with Celsius degree or Fahrenheit degrees.
And able to show the failure code on which heat pump.
Shall you have any inquire or interested in our pool heat pump. Feel free to contact us anytime!