We got more and more inquire about the evi air source heat pump these days.
The happy client just confirm the 40GP order for 50 units. They are impressed by below
1. twin special EVI design fan motor suitable for low ambient temp
2. Copeland EVI compressor, Vapor Injection enhances heating capacity at the most demanding low winter ambient as high as 40%
3. There are heating belt on the chassis and under the blue fin condenser, to help to melt the ice ( due to low air temp could made the condensation water into ice soon)
4. Sure there are 4 x big Condensation water outlet on the back, , make it fast and easy to drain out all water. No water freezing from the bottom of the evaporator.
5. SUS 304 screws plus plastic gasket which will never rust, and plastic gasket can also prevent to scratch the steel panels , even SUS 304 screws rusted one day, it will not rust the steel because of insulation of the plastic gasket.
6. Important water draining valve in built-- which can be Emptying all the water inside heat exchanger when not using the heat pump, especially winter time
7. Surely ,there is craft heater on the compressor, to help to compressor feel warm even at temp drop to minus 25 deg c.
Extra cooling function could be add in our evi air source heating pump, one single unit could offer you both heating and cooling, in other words, offer you heating (room heating, floor heating, fan coil heating) during winter time, while offer you cooling in summer time.
We are glad to show the 10kw model of evi air source heating pump to you
Which With below same features as the 15kw one.