Fault reasons and troubleshooting of gas generator

   date:2020-10-27     browse:3    comments:0    

The reasons for the failure of the gas generator under power or its sudden decline and the methods for its elimination

  

1. Fault cause: the air filter of the biogas generator is blocked.Method of elimination: Clean the air filter.

2. Failure reason: inlet and exhaust valve and valve seat or valve spring failure.Elimination method: replace.

3. Failure reason: improper valve clearance.Elimination method: Adjust.

4. Fault cause: Ignition advance Angle is incorrect.Elimination method: Calibrate ignition advance Angle.

5. Fault cause: gas pipe of biogas generator is blocked or gas pressure is too low.Method of elimination: inspection or maintenance.

6. Fault cause: gas composition changes.Method of elimination: Check gas composition.

7. Fault cause: high-voltage line failure.Elimination method: replace.

8. Fault cause: ignition coil failure of biogas generator.Elimination method: replace.

9. Fault cause: the exhaust system of the biogas generator is blocked.Method of elimination: repair or replacement.

10. Fault cause: individual spark plugs of biogas generator are not working normally.Method of elimination: Replace damaged spark plugs.

11. Fault cause: the speed controller or actuator of the biogas generator fails.Elimination: Adjust or replace.

image.pngimage.png

 
Article Source: Fault reasons and troubleshooting of gas generator
reward
 
More>Related News
0 itemsComments

Recommended Articles
Recommended News
Browse Ranking

Links