The drying of fish is generally required to be carried out at a relatively low temperature to avoid the high temperature affecting the quality of the fish after drying. The moisture of fish is found in fats and oils. Dehydration is difficult, and controlling the rate of dehydration is critical. Rapid drying will destroy the drying quality of the fish, so the drying time needs to be longer. IKE heat pump fish dehydrator is suitable for drying all kinds of freshwater fish and marine fish. It dry fish at low and middle temperatures, which dry the fish better. The dried fish do not change any of its nutritional value. The scent of the fish is preserved and the taste is better.
How to dehydrate fish
by IKE food dehydrator
Ingredients: fish, size above 100mm
Drying target: good taste and strong and hard fish meat
Directions:
Drying Method: Hang dry
1. Set the temperature at 15 degrees Celsius for 10 to 15 hours, so that the fish shrink, and removing a portion of the water;
2. Adjust temperature to 45 degrees Celsius and dry for 10 hours to start strong drying process;
3. Low down temperature to 15 degrees Celsius to dry for 6 to 8 hours, at this process, the moisture which contain in the inner parts of the fish can release to the surface.
4. Dry in 50 degrees Celsius for 10-12 hours.
5. Finished the drying, wait for the temperature cold down, checking the quality and ready for packing
Note: If you required the fish seems hard and strong dried, you should choose WRH-100D, WRH-500D fish dehdyrators. If not, can choose model: WRH-100G, WRH-300GB, WRH-500A and WRH-1200A fish dehydrators.
dehydrated fish
dehydrate fish with IKE fish dehydrator
dehydrate fish with IKE fish dehydrator
IKE Fish Dehydrator - Click to Choose
Commercial WRH-100G Heat Pump All-in-one Fish Dehydrator
Capacity: 20~100kg per batch
Machine Dimension (L*W*H): 1180*680*1800MM
Power supply: 220V, 50Hz/60Hz
Drying Temperature: 50℃~80℃
Commercial WRH-100G fish dehydrator just needs to connect the power to use, is the easiest operation heat pump fish dehydrator. WRH-100G fish dehydrator used heat pump technology for energy saving. Drying takes place in a closed system, which makes your fish clean and sanitary. View Equipment →
Commercial WRH-300GB Heat Pump All-in-one Fish Dehydrator
Capacity: 100~350kg per batch
Machine Dimension (L*W*H): 1880*980*2100MM
Power supply: 220V, 50Hz/60Hz
Drying Temperature: 50℃~80℃
Commercial WRH-300GB fish dehydrator also just needs to connect the power to use. Its capacity is more than WRH-100G fish dehydrator. WRH-300G fish dehydrator also used heat pump technology for energy saving. Strong wind parallel penetration, better drying effect, and higher uniformity. View Equipment →
Commercial AIO Series Heat Pump All-in-one Fish Dehydrating System
Capacity: 400~1500kg per batch
Power supply: 220V/380V, 50Hz/60Hz
Drying Temperature: 50℃~80℃
Commercial AIO series fish dehydrating system also just needs to connect the power to use. Customers do not need to install the machine. Commercial AIO series fish dehydrating system is the largest and most convenient all-in-one drying machine. Customers can customize the accessories according to actual needs. View Equipment →
Industrial Heat Pump Fish Dehydrating Room
Capacity: 200~1200kg per batch
Power supply: 220V/380V, 50Hz/60Hz
Drying Temperature: 20℃~80℃
After constructing an insulated drying room, push the main food dehydrator machine into the drying room and simply connect the power cord to work normally. IKE industrial fish dehydrating room has no external configuration. The fish are dehydrated in a completely sealed space. You just need to put the fish on the rack and then moved them into the drying room. View Equipment →
Customized Conveyor Mesh Belt Large Fish Dehydrator
Capacity: customized
Drying Temperature: 20℃~80℃
IKE conveyor mesh belt fish dehydrator is automatic continuous drying equipment for large-scale dried fish production. The fish dehydartor production line can be equipped according to the user’s requirement and the production demands. View Equipment →