Wifi smart control function is pretty hot in 2019.
We got a couple of demands for wifi smart control function in the heat pumps.
Also with Happy client repeated the wifi control heat pumps again this month.
Almost all OSB heat pumps could with wifi smart control, such like the ZR all in one heat pump, the pool heat pumps, the hot water heat pumps, high temp heat pump of 80c degrees and so on.
How this wifi smart control work?
There is wifi mould board built in our heat pump controller, which can received the wifi single and connected to the internet, and exchange all running parameter /data from the controller to the website.
As it is heat pump with wifi, that’s to say, wifi single is a must.
Make sure that installation area of heat pump with good wifi connection.
Otherwise, without wifi, the heat pump will off line, due to there is not possible to forward all parameter of heat pump on line.
And there is one importance question, how to connect the OSB heat pump to your local wifi service?
It is not difficult to do that.
There are 3 steps.
Firstly, Install the APP of “SmartLink3 Demo”
Secondly, Turn on the heat pump, and make sure the area of heat pump installed cover with wifi signal.
What's more, make sure your smart phone with wifi connected.
And then long press the power button and DOWN button of LCD controller for 10 seconds.
Thirdly, input the password of your local wifi and passwords
And press “Start”.
When there is MAC code showed up, that’s done!
For details spec about OSB heat pump with wifi function, feel free to email us.