Because the anti-theft requirements of sliding door locks are not too high, they usually installed in the passage or bathroom. Therefore, the selection of the lock body must be thick and strong, and the opening of the hook bolt is smooth.In the selection of the panel, you can choose the appropriate plating surface, style and function according to your special requirements. The surface of the panel must be bright, no scratches, the screw holes should be matched with the screws, and there should be no partiality.
Then come to the details: pay attention to the matching of forend and sliding door locks, after the screws is tighted, the lock body should not swing on both sides. After installed the front and inside trim, check if the knob could unlock smoothly. If not, loosen the screw, and adjust it with a rubber hammer until it is working properly.