As the technology of ultraviolet sterilization lamp is more and more developed, the use of uv sterilization lamp tube tube is convenient for our life. When we are using ultraviolet sterilization lamp, how should we maintain uv sterilization lamp tube? How to prolong the service life of uv sterilization lamp tube tube is best? Below by Tepro take you to understand the method of prolonging the life of uv sterilization lamp tube tube.
Prolong the technique of ultraviolet sterilization lamp tube
1. First of all, to avoid too often to start the UV lamp. when an uv sterilization lamp tube is lit at the start stage, the internal voltage is very low. The electrodes at both ends emit tungsten during this time, which causes many punctate contaminants inside the UV-sterile lamp tube, which is one of the causes of premature damage to the UV-sterile lamp tube. Therefore, lights should be lit under high voltage conditions, while reducing the lighting time. Too frequent lighting will lead to the ultraviolet sterilization lamp tube at both ends of the premature blackening, gradually affect the main part of the ultraviolet sterilization lamp tube will also become black, and finally lead to the ultraviolet sterilization lamp tube output power reduction. For the above reasons, we suggest Whenever possible, try to light all the work at once.
2. then carefully install the uv sterilization lamp tube. In order to extend the UV sterilization lamp tube life, should follow the UV sterilization lamp tube installation instructions carefully. For example, avoid oil stains on your fingers on the UV lamp tube. Installation personnel apply tissue cleaning or wearing gloves. we also recommend wiping the surface of the uv sterilization lamp tube with alcohol to keep it clean. It is also important to ensure that both ends of the UV lamp are tightly connected to the machine without corrosion.
3. Check the clean casing and cooling system. In order to maintain the maximum power of ultraviolet sterilization lamp and machine.
