Sincerity to our customer is the most important in SCT DIGITAL TECHNOLOGY CO.LTD. Contact us! The Professional Supplier of DLP Optronic Product in the Manufacturing Electrical Equipment & Supplies Optoelectronic Displays Industry SCT DIGITAL TECHNOLOGY guarantees DLP Optronic Product to be high-quality by carrying out highly standardized production. Compared with other products in the same category, it has the following advantages. SCT DIGITAL TECHNOLOGY insists on providing customers with reasonable solutions according to their actual needs.
Working Principle of filter The working principle of the filter is: when the filter works,The water to be filtered enters through the nozzle,Flow through the filter screen,And enter the pipe required by the user through the outlet used for the process cycle.The particulate impurities in the water are trapped by the filter.With this continuous cycle,More and more particles have been intercepted,The filtering speed is getting slower and slower.Imported sewage is still entering continuously,The filter holes will become smaller and smaller,Causes a differential pressure between the inlet and outlet.When the difference reaches the set value,The differential pressure transmitter sends an electrical signal to the controller.The control system starts the drive motor,The drive shaft rotates through the transmission parts,At the same time, the sewage outlet is opened and discharged from the sewage outlet.When the filter is cleaned,The differential pressure drops to the minimum,And the system returns to the in
What are the requirements of self-cleaning filter for water quality turbidity? Self-cleaning filter requires turbidity of inlet water quality: the turbidity of inlet water should not be higher than 60 mg/L.The self-cleaning filter can only be used according to the rated voltage/frequency indicated on the nameplate.The filter should be maintained every once in a while.Before cleaning and maintenance,Be sure to disconnect the self-cleaning filter power supply.Please make sure that the wire plug is not wet before cleaning or you must dry the plug before reconnecting the power supply.Do not unplug the power cord with wet hands.Self-cleaning filters are only used in indoor aquariums.If the filter is damaged,Especially when the power cord is damaged, it cannot be used.Please make sure that the self-cleaning filter works in the correct water level,The filter cannot be used without water.Do not disassemble or repair without permission,To avoid danger or damage to the body,
