A number of deposits accumulate naturally inside water heaters, including iron and calcium. Calcium deposits are carried into the tank with the incoming cold water. These deposits collect in the bottom of the tank and will gradually reduce the efficiency of the unit. To prevent this, water heaters are fitted with a flushing valve located on the side of the bottom of the heater. The valve accommodates a garden hose, which you can use to quickly evacuate the deposits.
Flush the hot water tank annually as part of regular maintenance.
Are you worried about how to clean up the calcium in the water heater? OSB Heat Pump Company tells you that it's not difficult to clean up the Calcium Deposits in Hot Water Heaters by doing the following steps.
Step 1
Thread the female tip of a garden hose onto the flushing valve.
Step 2
Position the opposite end of the hose in an area suitable for draining, such as a floor drain.
Step 3
Turn the handle on top of the flushing valve counterclockwise to open the valve. Allow several gallons of water to drain out of the tank, or until the water runs clear.
Step 4
Close the flushing valve by turning its handle clockwise. Disconnect the garden hose.
We hope OSB heat pump company's suggestion is effective for you. If you or your friends have heat pump demand, please feel free to contact us.
OSB was established in 1999, with 19+ years rich experience in manufacturing and exporting air to water heat pump products, dedicated to provide the highest quality of service and most demanding products available in the latest market. Our products include Air To Water Heat Pump ,Swimming Pool Heat Pump, All In One Heat Pump,EVI Heat Pump, 85 ℃ High Temp Heat Pump, DC inverter heat pump, etc. The heating capacity from 3kw to 83kw can be chosen. Can OEM & ODM according to your requirement.
The content of the article comes from the internet. If there is any infringement, please contact us to delete it.