Have you want your pool/spa heating just as simple as ABC?
No need to change the setting of water temp always?
Now osb pool heat pump with manul thermostat control could be the kind of heat pump which can help.
What’s is pool heat pump with manual thermostat control?
As manuale control told, it could need to adjust the temp by knob, and heat pump will start and stop as per the set point temp. Or let us know put it that, when water inlet temperature is lower than target set temperature, heat pump will swithc on ; when water inlet
temperature is higher than target set temperature, heat pump will switch off; For example, when temperature set to 28°C, when water inlet temperature is lower than 28°C, heat pump will start up and run in heating mode. When water inlet temperature increase higher than 28°C, heat pump will switch off the compressor .
What’s good for such manu thermostat control?
Due to some area with serious problems with humidity, most of the client just want to have hot water/heating the pool , and they prefer equipment with no electronic, they have no need for displays saying the temperature. The thermostat control could be more reliable as there could be no electronics to fail, easy to replace parts like the thermostats.
We cover a full range of pool heat pump from 3kw , 5kw, 7kw and 9kw pool heat pump with manul thermostat control. And the maximum set point is 40 deg c for the manual thermostat. See below pic for better understanding about the thermostat knob which we use.
It is easy to trun the knob to choose the target set point of your pool/spa.
Feel free to contact us to get further info about the pool heat pump with manul thermostat control if you may interested in.