The uv sterilizer casing is an important part of the uv sterilizer lamp. the uv sterilizer casing is located between the main body of the uv equipment and the uv sterilizer lamp. the main function is to prevent the direct contact between the water and the lamp tube and to cooperate with the cylinder to achieve the effect of pressure sealing. If the UV sterilizer lamp casing is damaged, the replacement should be stopped immediately.
★More Articles on Ultraviolet Lamp,Welcome to Read☟▼☟☟
◇▷▷Can ultraviolet lamp kill novel coronavirus pneumonia◁◁◇
◇▷▷UV disinfection lamp precautions for disinfection◁◁◇
◇▷▷Food place UV sterilizer lamp disinfect◁◁◇
◇▷▷UV sterilizer lamp disinfect◁◁◇
UV sterilizer Lamp use and installation be noted points:
UV sterilizer lamp casing Mo hardness in 5.5-6.5, use must be light, very careful;
UV sterilizer lamp quartz casing, must be wiped clean before use. can be soaked with 10% hydrofluoric acid or lotion and then washed with high-purity water or treated with alcohol. Operation should wear thin wire gloves, do not allow the use of hands directly touch the UV sterilizer lamp casing;
It is good for prolonging the life of quartz glass and improving the temperature resistance when the UV sterilizer lamp casing is used continuously under high temperature. On the contrary, under the high temperature intermittent use, its use times are limited;
Although the quartz casing has high thermal stability, it can withstand severe temperature change. However, in practical use, due to the different residual strain and product shape, there are certain differences in thermal stability, which should be paid attention to when using.
Although the quartz casing has high thermal stability, it can withstand severe temperature change. However, in practical use, due to the different residual strain and product shape, there are certain differences in thermal stability, which should be paid attention to when using.
