Change the specification, the paper core is on the inside and outside winding arm, the press roller is in the ready state, notify all personnel to leave the machine and ready to run. Place anti-staicbars on the main console in AUTO, open READYTORUN, and start MACHINERUN. When the inside and outside ends of the machine stop, use the unload button to place the film on the ready unload trolley, cut the film and attach the film roll with sealing adhesive. Use the collet release button to release the collet and check that the film core has left the core. If it is still stuck in the core, remove the film manually.
After making sure that all the film is off the chuck on the car, when buying a splatting blade using the film button, know your needs first. What kind of blades do we need to buy? Don't look at the look of the blade or buy it cheap. The blade you bought is definitely not. It fits you. The quality of this blade will not be very good. It will break down over time.
When buying blades, don't always go after branded items. It's better to buy one that fits you. There is no such thing as the best blade in the world, but there is certainly a blade for you to use, so everyone should know the advantages of a blade when making a choice. And the disadvantages are then chosen, so the blade you choose is definitely the most suitable for you, it will be easier to cut.
We need to use different blades for different occasions, so you should buy more different styles to meet the needs of the occasion. If you need more blades, you must determine the number. It's best to buy more at once. The blades you buy will meet your needs.