Dried sprout can be used as fast food. The IKE sprout dehydrator dry fresh sprout at low and middle temperatures, which dry the sprout better. The dried sprout do not change any of its nutritional value. The scent of the sprout is preserved and the taste is better.
How to dehydrate sprout
by IKE food dehydrator
Ingredients: sprout
Directions:
1. Wash the sprout and take the bad part of them.
2. Put the sprout on the tray evenly and let them keep a little distance from each other.
2. Put them into the IKE dehydrator and set the target temperature at 60 degree C.
4. After 5~6 hours the sprout will finish drying. When we drying the sprout, we must be put a lot of sprout on the tray so that the color after drying will be better. (The Dehydration rate of sprout is about 93%)
The dried sprout will regain moisture when they are in direct contact with the air, so a sealed package is required. If you use vacuum packaging, you can better preserve the color and aroma of sprout.
dehydrated sprout
IKE Sprout Dehydrator - Click to Choose
Commercial WRH-100G Heat Pump All-in-one Sprout Dehydrator
Capacity: 20~100kg per batch
Machine Dimension (L*W*H): 1180*680*1800MM
Power supply: 220V, 50Hz/60Hz
Drying Temperature: 50℃~80℃
Commercial WRH-100G sprout dehydrator just needs to connect the power to use, is the easiest operation heat pump sprout dehydrator. WRH-100G sprout dehydrator used heat pump technology for energy saving. Drying takes place in a closed system, which makes your sprout clean and sanitary. View Equipment →
Commercial WRH-300GB Heat Pump All-in-one Sprout Dehydrator
Capacity: 100~350kg per batch
Machine Dimension (L*W*H): 1880*980*2100MM
Power supply: 220V, 50Hz/60Hz
Drying Temperature: 50℃~80℃
Commercial WRH-300GB sprout dehydrator also just needs to connect the power to use. Its capacity is more than WRH-100G sprout dehydrator. WRH-300G sprout dehydrator also used heat pump technology for energy saving. Strong wind parallel penetration, better drying effect, and higher uniformity. View Equipment →
Commercial AIO Series Heat Pump All-in-one Sprout Dehydrating System
Capacity: 400~1500kg per batch
Power supply: 220V/380V, 50Hz/60Hz
Drying Temperature: 50℃~80℃
Commercial AIO series sprout dehydrating system also just needs to connect the power to use. Customers do not need to install the machine. Commercial AIO series sprout dehydrating system is the largest and most convenient all-in-one drying machine. Customers can customize the accessories according to actual needs. View Equipment →
Industrial Heat Pump Sprout Dehydrating Room
Capacity: 200~1200kg per batch
Power supply: 220V/380V, 50Hz/60Hz
Drying Temperature: 20℃~80℃
After constructing an insulated drying room, push the main food dehydrator machine into the drying room and simply connect the power cord to work normally. IKE industrial sprout dehydrating room has no external consprouturation. The sprout are dehydrated in a completely sealed space. You just need to put the sprout on the rack and then moved them into the drying room. View Equipment →
Customized Conveyor Mesh Belt Large Sprout Dehydrator
Capacity: customized
Drying Temperature: 20℃~80℃
IKE conveyor mesh belt sprout dehydrator is automatic continuous drying equipment for large-scale dried sprout production. The sprout dehydartor production line can be equipped according to the user’s requirement and the production demands. View Equipment →