Roll coated aluminum veneer, Price of roll coated aluminum veneer, Manufacturer of roll coated aluminum veneer, Quotation of roll coated aluminum veneer in China.
Conventional aluminum veneers are all sprayed aluminum veneers, but roll coating aluminum veneers are relatively rare. Because the roll coating aluminum plate adopts continuous rolling coating process, the painting is completed at one time, so as to ensure that the product has good color uniformity and no color difference.
The plain color of roll coating aluminum plate adopts two times of roll coating and two times of baking. The metal color can be painted three times, three times for baking, or four times for coating and four times for baking, so as to ensure that the color does not change color for a long time and the luster is the same as before.
Roll-coated aluminum veneer
Advantages of roll coated aluminum veneer:
1. High yield. Roller coating production is an automatic production line, the slowest speed is 20 meters per minute, the fastest speed is 60 meters and more than 100 meters. If the thickness of 0.8mm aluminum plate is calculated, the output is 260 kg per minute, and 125 tons of products can be produced in 8 hours.
2. Save paint and energy. The paint used in the coating process of aluminum plate is recycled up and down, and there is little waste. A kilogram of paint can be applied to more than ten square meters of aluminum plate. After the spraying line, a kilogram of paint can only paint 4 square plates, more than half of them fall into the sink and waste. The oven of the roller coating line is compact. Compared with the spray line oven, it will save a lot of energy for heating.
3. Roller coated board paint surface is more delicate. In some delicate decorative panels are required to paint fine, roller coated plate is one of the best technology.
With the demand for roll coating veneer in the curtain wall industry, the domestic pre-roll coating veneer production line has entered the market. What is more gratifying is that aluminum bottom plate manufacturers can not only produce high-quality roll coated aluminum veneer but also produce a variety of new products such as aluminum honeycomb composite plate, roll coated aluminum gusset plate, etc. From single products to diversified products, more varieties, better quality, and more significant economic benefits.
Different Finish & color patterns of roll coated aluminum veneer
Bangli Building Material is an aluminum veneer manufacturer with a history of more than 20 years, integrating R & D, production, design, and sales. It is a professional manufacturer of indoor and outdoor metal aluminum ceiling, aluminum veneer curtain wall, aluminum square ceiling, fluorocarbon aluminum veneer, aluminum grid ceiling, aluminum gusset plate manufacturer, metal single-layer aluminum curtain wall panel, special-shaped ceiling, light steel keel, aluminum embossed plate, aluminum honeycomb panel, integrated It is a large-scale building material enterprise with supporting materials for ceiling and ceiling.