Most of us felt comfortable when the floor is heating , so as to heating the house. And under floor heating is more and more common in winter time, When Room temp were adjusted as 22-25 deg c, while water set point temp need to keep as 35- 45 deg c.
However, normal heat pump could stop when water temp reach, and re-start for heating when temp drop at less 5 deg c. With compressor start/ stop, room temp can not maintain warm constantly.
To solved that problem----with less temp difference, and room temp could be kept constantly and feel more comfortable.
OSB inverter heat pump special design for floor heating are available.
Up till now, there are 4 difference model available, from 7kw, 10kw and 15kw with 230v, also 13kw with 380v.
What’s good for OSB monoblock inverter heat pump ?
See more key feature as below
l Side fan monobloc design with metal casing
l Single phase/ 3 phase optional which fit for 50hz and 60hz area.
• Rated heating capacity optional from 8kw to 15kw
The 12kw model with EN14825 approval, high SCOP up to 3.92, with class A++.
• Outstanding performance for floor heating.
• High COP
* hot water maximum 40 deg c (adjustable)—That means it is possible set the hot water as per your desire temp.
• Famous inverter sanyo compressor in built
• Use 4-WAY VALVE, expansion valve and plate heat exchanger
• Automatic defrosting
• Powerful carel controller
• Environmental friendly refrigerant of R1410
• Timer function
• Safety air switch
• Modular control function optional--which able to controller maximum 16 heat pumps at the same time.
For further info about technical data for our monoblock inverter heat pump , feel free to email us.