Compared with the central air conditioning, the multifunction air source heat pump system has the advantages of upgraded configuration, better performance and rapid development.
What are the upgrading advantages of air source two-way supply compared with fluorine system multi line supply?
1. Comfort
There is a big difference between the comfort of the fluorine machine and the water machine. When the fluorine machine is running, the refrigerant directly exchanges heat with the air, the dehumidification quantity is too large, the dehumidification excessively causes the indoor air to be dry, and the long-term opening feeling is obvious. The difference between the water machine and the fluorine machine is that after the outdoor machine compresses the refrigerant, the cold / hot water generated by the heat exchange with the water exchanges with the indoor air. The water in the air is not easy to lose, the air is softer, and the human body feels more natural and comfortable.
2. Multiple use of one machine
Air source heat pump is a heat source, which can supply cold water in summer and hot water in winter. The two ends refer to the end system where the radiation heating end and fan coil coexist. The fluorine system can not be directly connected to the radiator or floor heating and other end heating, need to purchase another wall mounted furnace as the heating system heat source.
A set of air source heat pump system solves many functions and saves the trouble of installing many systems.
3. Energy saving
The multifunction air source heat pump system has good energy-saving performance, and its operating cost is lower than that of the fluorine system combined with the wall mounted furnace.
The operating principle of the system is to drive the compressor with a little electric energy in winter, absorb a large amount of low-temperature heat energy in the air and convert it into high-temperature heat energy, generate hot water of no more than 55 degrees, and as a heat medium, it circulates and flows in the special pipe for floor heating, radiating heat transfer. In summer, the main engine changes to air-conditioning mode to produce chilled water that meets the temperature requirements. After heat exchange in the fan coil through the circulation system, the cold air is blown out. In terms of heating in winter, the energy conservation of air source heat pump is much higher than that of other heating systems.