0.5KG ABC dry powder mini car  fire extinguisher

mainly used for vechile purpose, spefical for car, good for A, B, C, E Fire

Cylinder can be refillable

Good For Car Safety,Cheap price, Car bracket in plastic or Steel choice.

All parts made of extinguisher:red cylinder,valve,nozzle,safety pin,tamper seal,gauge,siphon tube,bracket

Each extinguisher use poly bag packing,avoid the paint scratch.10pcs extinguisher into brown carton,use cardboard separation.

Features and Applicated :
* Ammonium Phosphate Chemical powder ABC
* Sodium Bicarbonate Chemical powder BC
suitable for combating fires in Common Combustibles , Flammable liquids and gases,
Live electrical equipment, Combustible metals , easier clean up after fire

Technical Data : FOB NINGBO
Capacity : 0.5+0.05kg USD2.99/PC
Cylinder size : D75 x H200mm USD3.32/PC W/CAR BRACKET
Discharge times : > 7s
Discharge Range : > 3m
Temperature Range: -20~60ºC
Fire Class Rate : 2B, 1A
Working Pressure : 1.2MPa
Test Pressure : 2.5MPa

Accessories : Brass valve without hanger loop
Small red or black handle, hose outlet M16*1.5mm
White nylon nozzle
Siphon tube M16*1.5*160mm
Burden Gauge, Dia 25mm, thread: M10*1-12.5, 13.7 surface
Yellow plastic sealing

Packing : 10pcs a carton G.W: 10.5KG size: 40x16x27cm
20FT LOAD 13300PCS
Operating Instruction :
1. Quickly take extinguisher at a site where 5 meters away from the fire;
2. Turn it upside down before use, to loose the dry powder inside;
3. Take out the safety pin;
4. Hold the discharge hose with one arm and push the pressing handle with the other;
5. Keep upright position during powder spray, do not lying, upside down

Maintenance :
1. Should placed within reach and in a dry and ventilated place;
2. Preventing damps, solarization;
3. The parts in good installed, check it frequently, be recharged once be used;
4. Regularly check if the dry powder is caking, replace immediately if yes;
5. Cylinder should be Hydraulic Tested every 5 years, qualified them can be used

And how they load the cargo? Be remember that’s DG cargo, IMO 1044, CLASS: 2.2.  for inside

pressurized gas, not allowed to ship out by air or LCL cargo. ONLY for container and with DG 

shipping mark.

One small Fire Extinguisher has hundreds of processes and artwork. Now we attached below 

mainly processes for your reference, if lack any of one, you will meet bad quality problems. 

Trust WOFU, see how we manufacture them(only part of them):