Share
Brand： |
none |
Address： |
China |
Min.Order： |
none |
Supply： |
none |
Valid until： |
Long Term |
Product Details
1.2m 4ft T8 18W Rechargeable Emergency LED Tube Light with Built-in Battery 90mins backup
Emergency led t8 tube Specifications:
The Rechargeable LED Tube Light with permanent emergency system integrated into the tube itself. With normal power the tube operates normally and recharges your lithium battery. When there is a power outage, the emergency function starts working with a power of 3W (250lm)
Feature
- Incorperates emergency battery with a 120-minute
- The Emergency Light Tube has an ordinary operation while having electric current supply.
- The emergency mode will be active automatically once the power has been cut off. The Rechargeable tube light will remain on for the next two hours approximately with an emmission of 250 LM
- Once the electric current is restored, the Emergency Led tube will return to full power.
Specifications of Rechargeable 9W/18W LED Motion Sensor T8 Tube Light with Rechargeable Battery
| Type | LED T8 Tube Light with Rechargeable Built-in Lithium battery | Motion sensor LED Tube Light with Rechargeable Built-in Lithium battery | ||
| Model | AM-8D605YJ | AM-8D1205YJ | AM-XD-300RDYJ15 | AM-XD-300RDYJ18 |
| Full Power | 9W | 18W | 15W | 18W |
| LED Qty | 48pcs*SMD2835 | 96pcs*SMD2835 | 30pcs*SMD5730 | 36pcs*SMD5730 |
| Rated Lumen | 700~800 lm | 1500~1600 lm | 800-900lumen | 800-900lumen |
| CRI | >80 | >80 | >0.5 | >80 |
| CCT | 2700K/6500K | 2700K/6500K | 2700K/6000K | 2700K/6000K |
| Power Factor | >0.5 | >0.5 | >0.5 | >0.5 |
| Beam Angle | 120 degree | 120 degree | 120 degree | 120 degree |
| Product Sizes (mm) | 600mm/2FT | 1200mm/4FT | 600mm/2FT | 1200mm/4FT |
| Package(Ctn) |
67*30*30mm 40pcs/ctn |
127*30*30mm
40pcs/ctn |
67*30*30mm 40pcs/ctn |
127*30*30mm 40pcs/ctn |
| Structure | Aluminum+PC | Aluminum+PC | Aluminum+PC | Aluminum+PC |
| Sensor data | ||||
| Sensor distance | / | / | 6-8m radius | 6-8m radius |
| Delay time | / | / | 15+/-5s | 15+/-5s |
| Sensor Principle | / | / | HF Microwave 5.8GHz | HF Microwave 5.8GHz |
| Transmission power | / | / | <0.2mW | <0.2mW |
| Detection range: Max(diameter*H) | / | / | 8m*6m | 8m*6m |
| Detection angle | / | / | 30° ~150° | 30° ~150° |
| Sensor Mode | / |
/ |
On/Off Full/Dim (100%~20%) |
On/Off Full/Dim (100%~20%) |
| Emergency Data | ||||
| Emergency Power | 3W | 3W | 3W | 3W |
| Lithium Battery | 18650, 3.7V, 2000mAh | 18650, 3.7V, 2000mAh | 18650, 3.7V, 2000mAh | 18650, 3.7V, 2000mAh |
| Backup time | 140 mins | 140 mins | 140 mins | 140 mins |
| Operation Temperature(Ta) | -10~40°c | -10~40°c | -10~40°c | -10~40°c |
| IP Rating | IP20 | IP20 | IP20 | IP20 |
| Function |
1. Connect to main power, (AC100-265V), The light work as a normal Tube light. (You can choose 2 different connection. single fire wire or Double Fire wires connection. 2. When power failure/Outage, The light work on emergency Backup mode, Backup power: 3W, Backup time: 90-110mins |
1. Connect to main power, (AC100-265V), The light work as a sensor light. (Full/dim mode)
2. When power failure/Outage, The light work on emergency Backup mode, Backup power: 3W, Backup time: 90-110mins |
||
Advantage
What is the advantage of the Emergency led tube Light ?
The main advantage of this tube is energy savings of more than 60%. It should be noted that the consumption of a converntional tube, apart from the consumption it self, requires a reactance whose consumption ranges from 3 to 8 watts per tube (depending on the quality of the reactance).
Another of the fundamental advantage is the saving in maintenance (replacement of primers, reactances and tubes..._ since the LED tube does not need reactances or primers.
- Note: the internal battery will take 24 hours to fully charge.
- When power is cut, the luminaire automatically switches into emergency mode, running at 10-15% output using the internal battery. (for 100mins when fully charged)
- Once power is restored, the luminaire is on and the battery will begin to re-charge.
Installation Instruction:
Step 1: Disconnect the electric current.
Step 2: Remove the conventional fluorescent tube.
Step 3: Unscrew and remove the primer, then disconnect the cables from the ballast.
Step 4: Connect the phase to one end of the tube and the neutral to the other end of the tube.
Step 5: Place the new led tube and connect the electric current.
In which places is it convenient to install LED tubes?
Normally in those places with many hours of lighting: Parking lot lighting, Hotel lighting, University and College lighting, office lighting, shopping center lighting.
Connection wiring for Emergency LED Tube Light ( Switch on / off at emergency mode)
Application of Rechargeable 9W/18W LED Motion Sensor T8 Tube Light with Rechargeable Battery
Emergency rechargeable t8 tube package:
♥ ♥ ♥ CUSTOMER FEADBACK ♥ ♥ ♥
1. Are you a manufacturer?
A. Yes, We are one of the biggest Microwave Sensor LED Lighting manufacturers in China! Such as Sensor LED Tube for parking lot, Basement, Sensor LED Bulb for corridor, stairs, Sensor LED Downlight/Ceiling light for Porch, Hallway, Balcony. etc.
2. Can i have a sample order?
A. Yes, Welcome sample order to test and check quality, Mixed samples are acceptable.
3. What about the delivery time?
A: Sample is about 1-2 days, Mass production 7-20 days depending on the order quantity and requirement.
4. Do you have MOQ?
A: Low MOQ, small order is welcomed.
5. Is it Okay to print my logo on products?
A: Yes, We can make laser print on products free of charge. Pls inform us formally before production and confirm the design firstly based on our sample.
6. How do u ship the finnal production?
1. By Sea
2. By Plane
3. By couriers,TNT,DHL,FEDEX,UPS, etc.
♥ If you want to know more information about our products
welcome to contact us in any time,
And welcome to our company!
We display more new design in our showroom.
Customer Reviews total 0 items